Skroutz.gr

Imperia PLC41 HF Plasma Cutting Inverter 40A
Welding Machines

Imperia PLC41 HF Plasma Cutting Inverter 40A

The Imperia PLC41 HF plasma cutter uses IGBT inverter technology and HF Touch arc starting to cut metals. It is suitable for steel, stainless steel, copper, cast iron and aluminium, with a cutting...

The Imperia PLC41 HF plasma cutter uses IGBT inverter technology and HF Touch arc starting to cut metals. It is suitable for steel, stainless steel, copper, cast iron and aluminium, with a cutting current range of 20–40 A. Its clean cut capacity in carbon steel is up to 12 mm, while its severance capacity is 17 mm.

It requires an air supply of 200 lt/min at...

See full description See full description

Top specs

  • Welding Current

    40

    Suitable for use on thin sheets and DIY constructions.

  • Duty Cycle

    The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

    2.

    For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.

  • Power Supply Voltage

    230

    It is the supply voltage that the machine requires from the electrical grid.

  • Power

    6.5

    Affects the power consumption of the machine and determines if it can be supported by the electrical network you are using.
  • See all
463 00 €
Delivery Tuesday
Free   shipping cost
From Toolflix 5.0 (42)
5.0 (42 reviews)
Νέα Ιωνία, Αττικής
In-store pickup available
1 piece
See Tools on the page of Toolflix

Shop selection criteria

Why do we recommend buying from this shop?

We don’t only look at the price. We weigh different factors to find an offer that combines a good price, fast delivery and a reliable purchase.

  • Product price

    We calculate the total price you will pay and any discounts available from the shop.

  • Shipping & delivery time

    We check how quickly the product can be shipped and when you will receive it, based on your address.

  • Shop reliability

    We look at how often shops complete their orders successfully and how consistently they serve their customers.

  • Official reseller

    Where available, we take into account whether the shop is an official reseller of the brand.
What if it breaks?

You're covered by the statutory 2-year warranty. Contact us and we'll handle the entire process with the store, ensuring your issue is resolved with prompt support through a repair, replacement, or refund.

What if I change my mind?

No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.

Review the product
Product report

Description

Description

The Imperia PLC41 HF plasma cutter uses IGBT inverter technology and HF Touch arc starting to cut metals. It is suitable for steel, stainless steel, copper, cast iron and aluminium, with a cutting current range of 20–40 A. Its clean cut capacity in carbon steel is up to 12 mm, while its severance capacity is 17 mm.

It requires an air supply of 200 lt/min at a pressure of 4 bar. It can be powered by a generator with AVR.

  • Type: Inverter plasma cutter
  • Technology: IGBT
  • Arc starting: HF Touch
  • Cutting current range: 20–40 A
  • Duty cycle at maximum current: 25% at 40 °C
  • Clean cut capacity in carbon steel: 12 mm
  • Severance capacity in carbon steel: 17 mm
  • Supply voltage: 230 V, single-phase, 50 Hz
  • Input power: 6.5 kVA
  • Maximum input current: 28 A
  • Efficiency: 85%
  • Power factor: 0.7
  • Air supply: 200 lt/min
  • Operating pressure: 4 bar
  • Generator power supply: With AVR
  • Weight: 7.8 kg
  • Package contents: PT-31 cutting torch, 5 m long, cable with earth clamp, air regulator and carrying handle

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
Plasma Cutting

Type

Plasma Cutting

It uses compressed air to cut almost any type of metal with speed and precision. At 50A, it can cut metal up to 2.5cm thick. 2. It is mainly used by specialized personnel in workshops (e.g. car repairs).
Welding Current (max)
40 A

Welding Current (max): 40


Suitable for use on thin sheets and DIY constructions.
Operation Cycle (max Ampere)
25 %

Operation Cycle (max Ampere)

The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

2.

For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
Supply Voltage
230 V

Supply Voltage: 230


It is the supply voltage that the machine requires from the electrical grid.
Power
6.5 kVA

Power: 6.5


Affects the power consumption of the machine and determines if it can be supported by the electrical network you are using.
Weight
7800 gr

Additional Features

Inverter
Yes

Inverter


New technology welding. Very good in terms of performance, durability, and weight, but with a high cost of repair in case of damage. They have automation for better and safer work. If connected to a generator, it is recommended to choose one with 8kVA or more.
IGBT
Yes

IGBT


Allows the conversion of direct current (DC) voltage to alternating current (AC) or the output of direct current at a higher or lower intensity.
VRD
No
with Voltage Stabilizer
No
for Generator with AVR
Yes

for Generator with AVR


Suitable for generator with AVR voltage stabilizer.

Features

Hot Start
No
Anti Stick
No
Arc Force
No
2T Operation
No
4T Mode
No
Spot Function
No
Pulsed
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications
Questions

Questions

Do you have a question about the product?

2 users have this product and can help you

Ask for the product

Description & Specifications

The Imperia PLC41 HF plasma cutter uses IGBT inverter technology and HF Touch arc starting to cut metals. It is suitable for steel, stainless steel, copper, cast iron and aluminium, with a cutting current range of 20–40 A. Its clean cut capacity in carbon steel is up to 12 mm, while its severance capacity is 17 mm.

It requires an air supply of 200 lt/min at a pressure of 4 bar. It can be powered by a generator with AVR.

  • Type: Inverter plasma cutter
  • Technology: IGBT
  • Arc starting: HF Touch
  • Cutting current range: 20–40 A
  • Duty cycle at maximum current: 25% at 40 °C
  • Clean cut capacity in carbon steel: 12 mm
  • Severance capacity in carbon steel: 17 mm
  • Supply voltage: 230 V, single-phase, 50 Hz
  • Input power: 6.5 kVA
  • Maximum input current: 28 A
  • Efficiency: 85%
  • Power factor: 0.7
  • Air supply: 200 lt/min
  • Operating pressure: 4 bar
  • Generator power supply: With AVR
  • Weight: 7.8 kg
  • Package contents: PT-31 cutting torch, 5 m long, cable with earth clamp, air regulator and carrying handle

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
Plasma Cutting

Type

Plasma Cutting

It uses compressed air to cut almost any type of metal with speed and precision. At 50A, it can cut metal up to 2.5cm thick. 2. It is mainly used by specialized personnel in workshops (e.g. car repairs).
Welding Current (max)
40 A

Welding Current (max): 40


Suitable for use on thin sheets and DIY constructions.
Operation Cycle (max Ampere)
25 %

Operation Cycle (max Ampere)

The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

2.

For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
Supply Voltage
230 V

Supply Voltage: 230


It is the supply voltage that the machine requires from the electrical grid.
Power
6.5 kVA

Power: 6.5


Affects the power consumption of the machine and determines if it can be supported by the electrical network you are using.
Weight
7800 gr

Additional Features

Inverter
Yes

Inverter


New technology welding. Very good in terms of performance, durability, and weight, but with a high cost of repair in case of damage. They have automation for better and safer work. If connected to a generator, it is recommended to choose one with 8kVA or more.
IGBT
Yes

IGBT


Allows the conversion of direct current (DC) voltage to alternating current (AC) or the output of direct current at a higher or lower intensity.
VRD
No
with Voltage Stabilizer
No
for Generator with AVR
Yes

for Generator with AVR


Suitable for generator with AVR voltage stabilizer.

Features

Hot Start
No
Anti Stick
No
Arc Force
No
2T Operation
No
4T Mode
No
Spot Function
No
Pulsed
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

463,00 €
Free   shipping cost