This specific model is one click better than the DS218 play and one click inferior to the DS218+. It has more memory, a quad-core processor, 1 USB 2 port on the front side, and the disks are inserted through a tray. Compared to the DS218+, it differs in terms of memory expandability, with 2GB standard + 4GB optional, the E-sata port, and the Intel processor. I was going for the DS218 play, but due to lack of availability from the original supplier, the order was canceled. In the end, it might have been for the best because in this specific model, the disks are inserted with a tray that can accommodate both 3.5" and 2.5" disks. I don't have space requirements, but I have security and speed requirements. So, I connected 2 SSDs of 500GB in RAID1. With SSD disks, your DS shows you the remaining time expressed as a percentage, with a lower limit of 5%. You can adjust it if you want. In my digital life, I have lost 4 HDDs and the 5th one is about to fail, while the SSDs, after 2½ years of daily 16-hour use, one is at 98% and the other at 99%. Now I only use SSDs and always in RAID1 for security.
The recognition and installation of the DS are easy, but if you want to change the format, RAID, or remote access from the internet, it requires reading. It is silent, smaller in size than a typical UPS, and consumes .... 5 - 6 Wh. I operate it from Linux M and the access is extremely easy and fast... Locations -> Network -> you see the name you have given to the DS, log in with the user credentials of the DS, and you're ready to go. A folder appears on the desktop, etc.