The first image and impression is very positive, clearly superior to the UP86 which I found heavy and tiring. I prune cherry trees, usually 20-30 mm branches. In the first 200 trees, it was excellent, but then the terminal started to come out on the lower side until it completely loosened. The problem was solved with silicone glue. When I cut thick and many branches, the belt loosens a bit and needs tensioning. After 500 trees, the plastic holder at the belt's exit under the scissors started to come out. The problem was solved with double-sided glue, but at some point, the scissors got stuck and required more frequent lubrication. Although I work it very hard, it is worth its money and meets my requirements. I highly recommend it

I use it professionally for pruning cherry trees and I have bought two. It is very good as a tool, cuts well, is lightweight, and you can prune very quickly. However, every 200 hours of use, the inner rope and the spring are cut. Spare parts are available, but they are only sold in sets. For the spring, you are forced to buy the blade and a chain link for 25 €. For the inner rope, you get the outer strap and the handles in the set... again 25 €. So, while the actual cost of the spare parts is 2-3 €, with this trick they take 50 € from you. As for the warranty... the spring was cut on the second day of use and the store from which I bought it refused to replace it... I'm not saying it may be the fault of that specific store and not the company, I'm just sharing my experience. And one last thing... to replace these specific spare parts, you will get frustrated and it will take you half a day