I don't know why, but Cougar manufactures the USB cable with soft plastic that has tremendous friction with the desk compared to other mice I've had. Maybe that's why we should also buy the Gougar mouse bungee!
There are three tricks that you may not know, so you don't have to pay extra money.
1) We patiently wrap a thin polyester thread (that is resistant to wear) around the cable at the points where there is friction. It takes 5-6 hours of work, always holding the spool in your hands while wrapping.
https://ibb.co/Rzb0rkJ
2) Change the USB cable to a braided one (e.g. the Durable Nylon Braided Line USB Mouse Cable Wire For Razer DeathAdder Elite Wired should be compatible).
3) Secure the cable by attaching it to the mousepad with a clip that can be found in bookstores. If the cable comes from the front, attach the clip to the screen.
https://ibb.co/7jgzRS7
This way, we save space on our desk without using a mouse bungee.
The mouse has rubber underneath for grip. In some mousepads, it may "stick" and create a lot of resistance. So, I bought the Cougar Speed 2 mousepad to pair with it, and now everything works fine. In fact, the mouse's user manual states, "To achieve optimal performance, it is highly recommended that you use this product with Cougar mouse pads."
Very high DPIs above 2,500 may never be needed, especially if we don't have a 4K monitor.
The switches are Omron, and replacements are easily available if they break (the 20M and 50 Million clicks switches fit the board).
P.S.:
I deducted two stars because even before I had it for a long time, the left button started double-clicking constantly. Also, the side plastic rubber is attached with cheap glue that sticks to the hand in one spot when it gets hot and needs to be wiped off. The switches are indeed Omron, but they are Chinese, not Japanese, which is why they break easily. I managed to fix the double-clicking issue with the help of the following two videos and some anti-corrosion oil, without using isopropyl alcohol or bending the copper leaf, as it was not necessary:
https://www.youtube.com/watch?v=IkNjL11WXOo
https://www.youtube.com/watch?v=eDoXMJyimDU
There are now mice available (such as the Razer Viper and the A4Tech Bloody Blazing A90) that have optical switches:
https://www.youtube.com/watch?v=b12B48EcUtM
Δεν ξέρω γιατί αλλά η Cougar κατασκευάζει το USB καλώδιο από μαλακό πλαστικό που έχει τρομερή τριβή με το γραφείο σε σχέση με άλλα ποντίκια που είχα. Ίσως έτσι για να αγοράζουμε και το mouse bungee της Gougar!
Υπάρχουν τρία τεχνάσματα που ίσως δεν τα ξέρετε, για να μην πληρώνουμε επιπλέον χρήματα.
1) Τυλίγουμε με υπομονή ένα πολυστερικό λεπτό νήμα (που αντέχει στην φθορά) γύρω-γύρω από το καλώδιο στα σημεία που υπάρχει τριβή. Δουλειά 5-6 ωρών κρατώντας πάντα στα χέρια το καρούλι στο τύλιγμα.
https://ibb.co/Rzb0rkJ
2) Αλλαγή του USB καλωδίου σε braided (πχ το Durable Nylon Braided Line USB Mouse Cable Wire For Razer DeathAdder Elite Wired πρέπει να είναι συμβατό)
3) Στερεώνουμε το καλώδιο έχοντας το μπόσικο, πάνω στο mousepad με ένα κλιπ-μανταλάκι που βρίσκουμε στα βιβλιοπωλεία. Αν έρχεται από μπροστά το καλώδιο, βάζουμε το μανταλάκι στην οθόνη.
https://ibb.co/7jgzRS7
Έτσι γλιτώνουμε και χώρο στο γραφείο μας χωρίς να βάλουμε mouse bungee.
Έχει κάτι λάστιχα κάτω το ποντίκι για την ολίσθηση. Σε μερικά mousepads μπορεί να "βρίσκουν" και να κάνουν μεγάλη αντίσταση. Οπότε αγόρασα το mousepad Speed 2 της Cougar για να κάνει ζεύγος και όλα μια χαρά τώρα. Μάλιστα στις οδηγίες χρήσης του ποντικιού γράφει "To achieve optimal perfomance, it is highly recommended that you use this product with Cougar mouse pads".
Τα πολύ υψηλά DPI πάνω από 2.500 ίσως να μην τα χρειαστούμε ποτέ, ειδικά αν δεν έχουμε 4Κ οθόνη.
Οι διακόπτες του είναι Omron και εύκολα βρίσκονται ανταλλακτικά αν χαλάσουν (οι 20Μ και 50Million clicks ταιριάζουν στην πλακέτα).
ΥΓ:
Αφαίρεσα δύο αστεράκια γιατί πριν ακόμα κλείσω χρόνο από την αγορά του, άρχισε να κάνει διπλό κλικ συνέχεια το αριστερό πλήκτρο. Επίσης τα πλαϊνά πλαστικά του λάστιχα είναι κολλημένα με μια φθηνή κόλλα που όταν έχει ζέστη κολλάει και στο χέρι σε ένα σημείο και θέλει σκούπισμα.
Οι διακόπτες είναι μεν Omrom, αλλά Κινέζικοι και όχι Ιαπωνέζικοι, γι' αυτό και χαλάνε εύκολα. Κατάφερα να διορθώσω το διπλό κλικ με την βοήθεια των παρακάτω δύο videos και με αντισκωριακό λάδι, χωρίς ισοπροπυλική αλκοόλη ή να λυγίσω το χάλκινο έλασμα μιας και δεν χρειάστηκε:
https://www.youtube.com/watch?v=IkNjL11WXOo
https://www.youtube.com/watch?v=eDoXMJyimDU
Υπάρχουν πλέον και ποντίκια (όπως το Razer Viper και το A4Tech Bloody Blazing A90) που έχουν οπτικούς διακόπτες:
https://www.youtube.com/watch?v=b12B48EcUtM