Ceramic tile adhesive designed for effective bonding in indoor and outdoor spaces. The product leverages scientific knowledge and long-standing experience and is suitable for professional use.

The “GLORIA ONE” is characterized by:

• Very good workability.
• Adhesion to cementitious substrates.
• Slip resistance.
• Resistance to shrinkage.
• Optimal price-quality ratio.

In bathrooms or outdoor areas, it should be used together with the strengthening emulsion “GLORIA DMG”. For Gres Porcelanato tiles with very low absorbency or large-sized tiles, the glue Gloria Special or Gloria Royal is recommended. It is classified in category C1T according to the European standard EN 12004.

Installation Instructions:

Use “GLORIA ONE” tile adhesive on walls & floors that are cleaned of brittle sections, residues of release agents, or other substances. Mix a quantity of “GLORIA ONE” with the appropriate amount of water in a clean container and homogenize with an electric mixer at low speeds for two (2) minutes until a paste is formed without undissolved pieces or lumps. Each 25-kilogram bag of adhesive requires approximately 6 liters of water.

The “GLORIA ONE” paste retains its “plasticity” for 3 to 4 hours at normal ambient temperature. Place the tiles without wetting the back, applying the appropriate amount of adhesive and pressing correctly. Use plastic spacers or crosses for the appropriate joints. After the tiles are placed, you can adjust their position within 15 minutes. After that, the glue with the tile “stabilizes” and any minor movement is no longer possible.

Consumption:

3 to 5 kilograms per square meter (m²), depending on the size of the tiles, the type and number of the trowel, as well as the thickness of their installation.