Clearly inferior compared to the factory screen on multiple levels. The attached photos show on the left an iPhone6s with the replaced screen, on the right a factory iPhone6s - ranking the points below from the most innocent to the most problematic:
a. Color deviation of whites (clear presence of red tint),
b. Lower maximum brightness which unfortunately creates problems in outdoor conditions,
c. Disappointing viewing angle - anything beyond 30-40° is simply unreadable (see photo with both screens at an angle),
d. Due to the presence of a protective (?) layer - like a glass on top of the screen, the grip and use of the device change due to the different curvature at the point of discontinuity between the chassis and the screen. It is noticeable and is precisely due to the abruptness of the 'protective' surface that covers the entire screen. 'Protective' is in quotes because on the one hand, nothing like that is mentioned in the description, and on the other hand, it cannot be removed, so it is simply stuck.
e. Inaccurate touch screen function which leads to many wrong touches, in no case satisfactory 'resolution' of the digitizer - can also be noticed from the non-smooth scrolling between screens/content, etc.
For replacement and use of the phone as a monitor indoors, it is simply acceptable, but for regular use, it is not recommended... especially if one considers that this is the most popular white replacement screen for iPhone6s...
Σαφώς υποδεέστερη σε σχέση με την εργοστασιακή σε πολλαπλά επίπεδα. Οι συνημμένες φωτο παρουσιάζουν αριστερά ένα iPhone6s με την αλλαγμένη οθόνη, δεξιά ένα iPhone6s εργοστασιακό - κατάταξη των σημείων παρακάτω από τα πιο αθώα στα περισσότερο προβληματικά:
α. χρωματική απόκλιση των λευκών (σαφής ύπαρξη κόκκινου tint),
β. χαμηλότερη μέγιστη φωτεινότητα η οποία σε εξωτερικές συνθήκες δυστυχώς δημιουργεί προβλήματα,
γ. απογοητευτική γωνία θέασης - ο' τιδήποτε πέραν των 30-40° είναι απλά δυσανάγνωστο (βλέπε φωτο με τις δύο οθόνες υπό γωνία)
δ. λόγω της ύπαρξης μιας προστατευτικής (;) στρώσης - σαν τζαμάκι πάνω από την οθόνη περιμετρικά αλλάζει η αίσθηση στο κράτημα και την χρήση της συσκευής λόγω της διαφορετικής κυρτότητας στο σημείο ασυνέχειας μεταξύ σασί και οθόνης. Είναι έντονο και οφείλεται ακριβώς στο απότομο της 'προστατευτικής' επιφάνειας που καλύπτει όλη την οθόνη. Το 'προστατευτική' σε εισαγωγικά καθώς αφενός πουθενά στην περιγραφή δεν αναφέρεται κάτι τέτοιο, αφετέρου δεν αφαιρείται οπότε απλά υπάρχει κολλημένο.
ε. ανακριβής λειτουργία του touch screen η οποία οδηγεί σε πολλές λάθος επαφές, σε καμία περίπτωση ικανοποιητική 'ανάλυση' του digitiser - μπορεί να διαπιστωθεί και από την μη ομαλή κύλιση μεταξύ οθονών / περιεχομένου κλπ.
Για αντικατάσταση και χρήση του τηλεφώνου ως monitor σε εσωτερικούς χώρους απλά αποδεκτό, για κανονική χρήση δεν προτείνεται..ιδίως αν σκεφτεί κανείς ότι πρόκειται για την πιο δημοφιλή άσπρη οθόνη αντικατάστασης για iPhone6s...