• Prevents slipping, transfers all output power, eliminates squeaking
• Eliminates readjustment work in case of slight belt slipping due to cold, humidity, or normal elongation
• Service life from production: 24 Months

Must be used only in well-ventilated areas.

The usage instructions are recommendations based on the tests we have conducted and our experience. Perform your own tests before each application. Due to the large number of applications and storage and processing conditions, we accept no responsibility for the result of any specific application. As long as the free customer service provides technical information or acts as a consulting service, this service assumes no responsibility except when the provided advice or services fall within the scope of the defined, contractually agreed service or if the consultant acted intentionally. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop our products.

Application area

For V-belts made of leather, rubber, balata, hair, etc. Not suitable for use on flat belts. When using the V-belt spray, the contact of the belt with the pulleys increases and separation and friction problems are minimized. The performance of the V-belt is enhanced.

Instructions

Attach the spray head and spray along the belt with the tip of the spray tube close to the inside of the belt. Alternatively, spray on an area inside while the engine is running for about 5 seconds.

Clean the surfaces where the product will be used before initial use. Use sparingly and accurately, do not spray excess material.