The single-phase Tellarini EEM 20 transfer pump is used to transfer clean liquids without particles, such as water, wine, must, diesel and food products. The BYPASS function allows the flow to recirculate when the liquid reaches a closed valve or the end of a hose, protecting the pump from wear. As a side-channel pump, it is self-priming even when air is present in the liquid, and both the direction of rotation and the flow are reversible.
The pump body and impeller are made of brass, the shaft of AISI 316 stainless steel, and the cover of AISI 304 stainless steel. Sealing is provided by an NBR oil seal and O-ring, while the cover gasket is made of Guarnital. The pump is suitable for continuous operation and comes with straight and angled fittings. It is not suitable for petrol or solvents, or for areas where there is a risk of explosion or fire.
- Type: Single-phase side-channel transfer pump
- Power supply: 220 V
- Power: 380 W
- Horsepower: 0.5 hp
- Speed: 2800 rpm
- Port: 3/4"
- Body and impeller material: Brass
- Shaft material: AISI 316 stainless steel
- Cover material: AISI 304 stainless steel
- Sealing: NBR oil seal and O-ring
- Cover gasket material: Guarnital
- Motor protection rating: IP44
- Maximum liquid temperature: 90 °C
- Maximum liquid specific gravity: 1.1 g/cm³
- Maximum suction depth: 6 m
- Maximum head: 27 m
- Maximum flow rate: 32 litres per minute
- Suitable liquids: Water, wine, must, diesel and food products
- Package contents: One straight and one angled fitting
Dimensions
- Power Source
- 220 V
- RPM
- 2800 rpm
- Fluid Inlet Size
- 3/4 "
- Horsepower
- 0.5 hp
- Power
- 380 W
- Pump Body Material
- Brass
Suitable for:
- Wine / Must
- Yes
- Olive Oil / Oil
- No
- Oil / Diesel / Fuels
- Yes
- Milk / Food
- Yes
- Chemicals / Acids / AdBlue
- No
- Water (Fresh / Sea)
- Yes
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.