- 365-day calendar.
- Great flexibility in selecting watering frequency.
- Easy adjustment of watering time from the screen, in 10% increments, allowing quick water adjustments according to weather changes.
- Large liquid crystal display with user-friendly icons.
- Programming is easy without the need for English knowledge.
- Option to activate/deactivate which days of the week watering occurs. Ability to set different days for different programs.
- Compatible with all weather sensors.
- Can be connected to rain, humidity, temperature, or wind sensors.
- Retains the program even during a power outage. Battery placement option for even greater security. 4 programs, A, B, C.
- Start times: 4 per day, per program for up to 12 daily starts.
- Run time per station: 0 minutes to 4 hours in one-minute increments.
- Automated chronological start sequence/start time.
- One start button and manual in advance.
- Seasonal adjustment: 0% to 150%.
- Electronic short circuit detection.
- Battery: 3V lithium (included) for remote programming and timing, not required for program backup.
- Programmable delay between stations.
- Programmable sensor input from the station.
- Initial program can be stored in memory and retrieved later if needed.
- Programmable rain delay from 1 to 7 days.
- Programmable day off allows specific day(s) to be set as always "off".
- Quick Check Hunter™ helps troubleshoot field wiring issues.
- Test program operation allows quick system check.
These irrigation programmers operate on electricity, provided with each programmer and its transformer, which is internally placed inside the box or externally depending on the model (indoor or outdoor). The transformer has an input of 220V - AC, 60 Hz and its output is 24V - AC, 1.0A with a maximum output per station of 24V - AC 0.56A so that up to 2 solenoid valves can be connected per station.
Automatic irrigation programmer Hunter X-Core Indoor 2, 4, 6, 8 stations. Reliable programmer for small irrigation networks with improved features. It is aimed at those who want a small programmer with low cost and some extra features.
Detailed Features of the X-Core Series:
- 365-day calendar.
- Great flexibility in selecting watering frequency.
- Easy adjustment of watering time from the screen, in 10% increments, allowing quick water adjustments according to weather changes.
- Large liquid crystal display with user-friendly icons.
- Programming is easy without the need for English knowledge.
- Option to activate/deactivate which days of the week watering occurs. Ability to set different days for different programs.
- Compatible with all weather sensors.
- Can be connected to rain, humidity, temperature, or wind sensors.
- Retains the program even during a power outage. Battery placement option for even greater security. 4 programs, A, B, C.
- Start times: 4 per day, per program for up to 12 daily starts.
- Run time per station: 0 minutes to 4 hours in one-minute increments.
- Automated chronological start sequence/start time.
- One start button and manual in advance.
- Seasonal adjustment: 0% to 150%.
- Electronic short circuit detection.
- Battery: 3V lithium (included) for remote programming and timing, not required for program backup.
- Programmable delay between stations.
- Programmable sensor input from the station.
- Initial program can be stored in memory and retrieved later if needed.
- Programmable rain delay from 1 to 7 days.
- Programmable day off allows specific day(s) to be set as always "off".
- Quick Check Hunter™ helps troubleshoot field wiring issues.
- Test program operation allows quick system check.
Advanced Features:
- Easy Retrieve ™ Memory
- Compatible with Hunter Clik sensors and other micro-switch type weather sensors
- One-touch manual start and advance for easy manual operation
- Rain sensor bypass
- Programmable rain delay: 1 to 7 days
- Test program allows for quick system checks
- Manual cycle
- Quick Check™
- Permanent memory storage
- Automatic short circuit protection
- Seasonal adjustment (global): 10% to 150% (in 10% increments)
- Station delay (maximum): 4 hours
- Zone-specific programmable sensor
- Remote control operation with Hunter ROAM and ICR remotes
- Automatic daily weather-based programming with optional Hunter Solar Sync sensor
Electrical characteristics:
- Transformer input power: 120 VAC or 230/240 VAC (international model)
- Transformer output power (24 VAC): 1 A
- Station output power (24 VAC): 0.56 A
- Station output power (24 VAC): 0.56 A
- Simultaneous station operation (includes master valve): 3 valves
- Pump/master valve
- Sensor inputs: 1
- Operating temperature: -18˚ C to 66˚ C
Technical Specifications:
- Irrigation controller with 6 stations.
- Three (3) independent programs.
- Four (4) starts per program.
- Watering duration from 1 minute to 4 hours.
- Irrigation settings: weekly scheduling per day or intervals of numbers 1-15 (skip-days).
- Semi-automatic program operation.
- Manual program operation.
- Safety program.
- Built-in or external transformer.
- Automatic electronic fuse.
- Pump start.
- Rain sensor connection.
Features & Settings
- Mode
- Electric
- Stops
- 6
- Expandable
- No
- Rain Sensor Connection
- Yes
- Permanent Memory
- Yes
Connection & Sockets
- with Solenoid Valve
- No
Watering Settings
- Time Delay
- Yes
- Manual Watering
- No
- Weekly Scheduling
- Yes
- Hourly Programming
- Yes
- Cyclic Programming
- No
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.