It makes incredibly good foam compared to the ones that come with the pressure washers, but it also consumes a large amount of soap!

Like all foam cleaners, it requires testing and practice. Each detergent has a different dosage than what it says. First of all, warm water for better dissolution in the container. Whether it's Maguire, Autoglym, Kärcher, Sonax, Nigrin, or the active foam from Wevora. All are good depending on the dirt on the car. The best result is with GloChem 805, which makes the desired blanket, not to mention a rug, on top

Very good foam maker. You adjust the foam as you want. Good quality construction. I would buy it again.

A very good foam generator for its price, it creates very good foam and of course, with its purchase, an adapter is needed depending on the pressure washer that everyone has. For amateur washing, it is very fair.

I have had this foam dispenser for almost 6 months now...(with a dosage of 250ml active foam per 1 liter) as time passed, it didn't produce as much foam, to the point where I had to use 400ml of active foam...but even then, it didn't spread easily, it only foamed with difficulty...I will switch to a better and more expensive one...

The foam sprayer does its job just fine. Okay, the cost may be a bit higher compared to abroad. Mine came with 3 nozzles, one that already had the 1.2 on it and 2 spare ones, 1.1 and 1.4 (if I'm not mistaken). In the end, I use it with the one that was already on. For those who use it with the Bosch aq 135, it will work better with the 1.2 nozzle as the 1.1 will cause interruptions to the pressure. Where interruptions = possible damage, so be careful! You will also need to purchase the correct adapter for the specific pressure washer.

After reading positive reviews about the other options, I decided to buy this specific foam sprayer because I didn't want to spend $85 on the MJJC V2 Pro (which is considered the best foam sprayer in the market).

First impressions, very good and high-quality construction. As for performance, we will see when I use it. I noticed that many users didn't have the 1.1mm nozzle in the package, but before ordering, I asked the store and they told me that the extra nozzle is included in the packaging. Finally, the nozzle did come with the foam sprayer. Another observation is that the foam sprayer doesn't come with any type of adapter to connect to the pressure washer, so whoever decides to buy it should keep in mind that they need to also purchase the appropriate adapter for their pressure washer.

I will come back with impressions from its use (Once I try it, I will also give it the 5th star if it deserves it).

Overall, it seems like a very good and honest choice at $35

Very good for its price and good construction. It works correctly for me with the foam fully open and closed, I have a 135 bar pressure washer

Very good tool, the result in the photos is with the smallest head of the package

I got it for amateur use and it is exactly what I want. I should note... I had to buy an adapter for my pressure washer even though it was shown in the foam cannon's photo.

Initially, the foam generator is honest for its price. Its construction quality is good and sturdy, I would say. The truth is that today I used it for the first time, but compared to the "mom" foam generator that had the pressure washer (a Parkside from a well-known German supermarket chain), there is a big difference. The package included both a 1.4mm and a 1.2mm head. With a dosage of approximately 80ml of professional foam and the rest water, it made very good foam. Overall, and based on its price, I was satisfied with the result.

Very good foam sprayer used with a 100bar pressure washer and active foam from k2. It makes rich foam, of course, this depends on the pressure washer and the foam one uses. I used a ratio of 100ml product and 400ml water, which I regretted because even with less product, it still does the job. At first, I was afraid it would come without the 1.1mm nozzle, as many were missing from the packaging. Mine came with two extra nozzles, as strange as it may sound. Overall, I am very satisfied and I believe someone with an even higher pressure washer and better active foam can make even better foam. Whoever buys it should consider a total of around 50 euros, because the foam sprayer is 35 euros and the adapter for the pressure washer is around 14 euros, so the total came out to around 50 euros from the store where I ordered them.

After reading reviews and comments, I decided to buy it myself. It does its job as it should, it makes good foam in a ratio of 100ml liquid to 1lt of water. If you want more foam, you use less water, around 0.8lt. I should note that I use it with the Lavor 160 pressure washer and I am completely satisfied.

It has nothing to envy from the more expensive ones, it will produce foam normally like car wash machines and videos on YouTube. It shows quality, I have had it for 5 months now, no problems and the nozzle is very high quality, metallic. If it doesn't produce foam like they show in the videos on the internet, you are doing something wrong, probably incorrect product proportions or poor quality.

A friend of mine got a mediocre foam cannon, I got the Polar Blaster kit, a bit more expensive at 60 euros, but it will compensate you, all its materials are equivalent to professional ones, and with the appropriate foam, prefer Auto Glym if you also have a pressure washer above 150 bar, the result on your car or motorcycle will impress you!

Very good foam sprayer, honest for its price, does the job, for a thicker foam, the upper valve needs to be fully closed, of course the active foam also plays a role, I tried it with the orbex-nk and the CS 608 from clean smart by karcher

The foam sprayer is excellent and has nothing to envy from more expensive brands. Although it didn't fit perfectly with my machine (maybe due to its age), it adapted perfectly with a patent. I don't know what nozzle it has inside, whether it's 1.1mm or 1.25mm, but with two different brands that I used and the foam regulator set to maximum, the foam was incredible. So, 4 stars for the foam sprayer and rightfully the fifth star for the store

Quite good quality! I give it 4 stars because it didn't have the 1.1mm nozzle inside the package like the other buyer below, which is important for thicker foam. It only had the 1.25mm nozzle. Okay, it does the job, but it depends on what results you want for your car! Immediate shipment, it was in my hands within 2 days!!