Gas Filter SR 315 ABE1 Sundstrom is designed to provide respiratory protection. A gas filter absorbs or adsorbs specific vapors and gases from a contaminated atmosphere.

It is compatible with Half Face and Full Face Masks from Sundstrom company:

• SR 90-3
• SR 100
• SR 200
• SR 900

Types of protection:

• Type A: Protection against organic gases and vapors, such as solvents, with a boiling point above +65°C.
• Type B: Protection against inorganic gases and vapors, such as chlorine, hydrogen sulfide, and hydrogen cyanide.
• Type E: Protection against acidic gases and vapors, such as sulfur dioxide and hydrofluoric acid.

For use as a Combined Filter, in environments where both gases and particles are present, a combination of gas filters and particle filters must be used simultaneously. Install the filters as detailed in the instructions of your device.

Note: the particle filter always snaps onto the gas filter, but the gas filter does not snap onto the particle filter. The gas filter is always inserted within the respiratory device.

It is recommended to change the gas filter according to the results of measurements taken at the workplace or every week if possible. Any filter that has been exposed to strong pressure or impact or shows visible signs of damage should be discarded immediately.

Individual Packaging. Additional information on available packaging: box of 5 pieces, carton of 50 pieces.

Suggested application: Shipping, Shipbuilding, Industry, Agriculture.