Special Paint & Additives

Vitex Pool Paint Pool Paint White 3.5lt

Key features:

  • Epoxy pool paint
  • Two components
  • Perfect adhesion
  • Top durability
See full description
44 63
45 Coins 45 Coins
Delivery by Wed, 01 Jul
2,50 € to a Skroutz Point
Do you want it with Free shipping?
From Kaxiris Monotika 4.1 (20)
Αθήνα, Αττικής
In-store pickup available
See Household Painting Supplies & Tools on the page of Kaxiris Monotika

Description

Description

Characteristics

  • Pool Paint is a 2-component epoxy paint, specially designed for maximum durability underwater
  • Suitable for concrete pools as well as metal surfaces
  • Provides a glossy and elastic surface that is particularly resistant to cleaning systems and pool chemicals.
  • It has excellent adhesion and high resistance to abrasion, acids, alkalis, and water, offering long-term protection
  • 2-component epoxy paint
  • Perfect adhesion
  • Top resistance to chlorine and pool chemicals

Preparation

  • Surfaces must be clean, dry, free of dust, oils, loose materials, or old single-component paints, and sanded with appropriate sandpaper
  • On cement surfaces, the same paint diluted 10-15% with Pool Paint Thinner is used as a primer
  • On a new pool, it is applied at least 28 days after its construction

Application

  • Mix component A and gradually add Pool Paint Thinner
  • Then add the entire amount of component B and stir very well for 3 minutes
  • The mixture should be used 5-10 minutes after mixing the two components and within 4-6 hours for ambient temperatures of 30°C and 20°C respectively
  • Apply in two to three coats with a roller, brush, or airless spray gun with a 5% dilution. It should not be applied at temperatures below 5°C, above 35°C, and/or relative humidity over 80%
  • The product is dry to the touch in 1-2 hours and can be recoated after 12 hours
  • The recoating time should not exceed 2 days
  • The pool can be filled with water 7 days after painting, when the paint acquires its final properties
  • These times vary depending on weather conditions (relative humidity and temperature).
  • Tools should be cleaned immediately after use with Pool Paint Thinner.

Manufacturer

See full description

Specifications

Specifications

Specifications

Type
Pool Paint
Colour
White
Acrilyc
No
Luminosity
Glossy

Quantity

Volume
3.5 lt
Weight
-

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications
Questions

Questions

Do you have a question about the product?

23 users have this product and can help you

Ask for the product

Description & Specifications

Characteristics

  • Pool Paint is a 2-component epoxy paint, specially designed for maximum durability underwater
  • Suitable for concrete pools as well as metal surfaces
  • Provides a glossy and elastic surface that is particularly resistant to cleaning systems and pool chemicals.
  • It has excellent adhesion and high resistance to abrasion, acids, alkalis, and water, offering long-term protection
  • 2-component epoxy paint
  • Perfect adhesion
  • Top resistance to chlorine and pool chemicals

Preparation

  • Surfaces must be clean, dry, free of dust, oils, loose materials, or old single-component paints, and sanded with appropriate sandpaper
  • On cement surfaces, the same paint diluted 10-15% with Pool Paint Thinner is used as a primer
  • On a new pool, it is applied at least 28 days after its construction

Application

  • Mix component A and gradually add Pool Paint Thinner
  • Then add the entire amount of component B and stir very well for 3 minutes
  • The mixture should be used 5-10 minutes after mixing the two components and within 4-6 hours for ambient temperatures of 30°C and 20°C respectively
  • Apply in two to three coats with a roller, brush, or airless spray gun with a 5% dilution. It should not be applied at temperatures below 5°C, above 35°C, and/or relative humidity over 80%
  • The product is dry to the touch in 1-2 hours and can be recoated after 12 hours
  • The recoating time should not exceed 2 days
  • The pool can be filled with water 7 days after painting, when the paint acquires its final properties
  • These times vary depending on weather conditions (relative humidity and temperature).
  • Tools should be cleaned immediately after use with Pool Paint Thinner.

Manufacturer

Specifications

Type
Pool Paint
Colour
White
Acrilyc
No
Luminosity
Glossy

Quantity

Volume
3.5 lt
Weight
-

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

44,63 €
2,50 € to a Skroutz Point