The surface must be dry, stable, and free from dust, residues, and loose old paints. Wet sanding is recommended for surface preparation.
» On new surfaces: Before applying the paint, apply a coat of water-based primer such as Kraft Eco Dur Aqua or Kraft Dur.
» On surfaces that need repair: use Kraft Spachtel or Kraft Putty or the appropriate repair material from Kraft.
» Allow new plaster or cement surfaces to dry completely for at least 30 days before applying the paint.

• Avoid application in case of impending rain in the next 7 days.
• Before starting painting, dilute 5-10% v/v with tap water and stir well.
• Suitable painting tools are: Brush, roller, or airless spray gun.
• Apply 2 coats of KRAFT PROFI CEMENT PAINT for an ideal result.
• Minimum recoat time 4-5 hours.
• Surface drying in 1-2 hours at 25°C and 50% relative humidity. Drying time is affected by weather conditions.
• Do not apply at temperatures below 5°C and above 35°C as well as above 65% relative humidity.

• Clean tools immediately after use with warm water and soap.
• Seal the container well to keep it in good condition for future use and store it before and after use in a cool place away from exposure to sunlight or frost.