Isomat Primer Acryl is a micronized silicone-acrylic water-based primer for porous exterior surfaces. It penetrates pores, stabilizes friable surfaces such as deteriorated plaster, and protects against rising damp and salt formation. It waterproofs the substrate while still allowing it to breathe.
Suitable for new or old porous surfaces that are to be coated with acrylic or silicone paints and plasters. Before application, the substrate must be dry and free of dust, grease and loose material, and any imperfections must be repaired. Apply one coat with a roller, brush or airless spray gun. Clean tools immediately after use with water and detergent.
- Type: Water-based primer
- Composition: Micronized silicone-acrylic
- Suitable surfaces: Building materials
- Use: Interior and exterior surfaces
- Colour: Slightly yellow
- Dilution: Up to 50% with clean water; apply undiluted on highly absorbent surfaces
- Coverage: 10–15 m²/l per coat, depending on absorbency and dilution
- Adhesion: Strong
- Penetration: High
- Resistance: To alkaline substrates
- Odour: Odourless
- Application and drying temperature: From +10 °C to +35 °C
- Touch-dry time: 1 h
- Recoating time: 4 h
- VOC content: Up to 30 g/l
- Volume: 10 lt
Specifications
- Genre
- Primer
- Surface Material
- Construction Materials
- Surfaces
- Multiprimer
- Properties
- Acrylic, Silicone
Quantity
- Mass Gaining
- 10 lt
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.