Isomat PL-Bond primer enhances plaster adhesion to smooth or non-absorbent surfaces as an alternative to a scratch coat. It consists of synthetic resins and quartz sand and, once applied, forms a rough substrate for the subsequent plaster layer. It is suitable for interior and exterior surfaces, as well as gypsum plaster.
For exterior use, mix with cement at 20% by weight. Apply in a single coat with a roller or brush to a dry surface free of dust, grease and contaminants. Application temperature: +5 °C to +30 °C.
- Type: Bonding primer
- Composition: Synthetic resins and quartz sand
- Application surfaces: Smooth or non-absorbent, interior and exterior
- Use: For plaster and gypsum plaster
- Form: Paste
- Colour: Terracotta
- Density: 1.48 kg/l
- pH: 7-9
- Drying time: 2-3 h
- Overcoating time: 8-10 h
- Consumption: 300-350 g/m², depending on coat thickness
- Application temperature: +5 °C to +30 °C
- VOC content: Maximum 30 g/l
- Weight: 1 kg
- Product Number
- 033301011
Specifications
- Genre
- Primer
- Surface Material
- Construction Materials
- Surfaces
- Multiprimer
- Properties
- Adhesion
Quantity
- Weight
- 1 kg
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.