The Prity NS32 is a freestanding wood-fired boiler designed to connect to a domestic radiator heating system. It connects to the central heating circuit and can also heat domestic water. Combustion takes place in the combustion chamber, beneath the heat exchanger, while the drawer below the chamber collects ash and makes cleaning easier.
The body is made of 2 mm-thick steel sheets, while the section around the combustion chamber is made of 3–4 mm-thick steel sheets. The cold-water inlet is at the top, and the hot-water outlet is at the upper rear. The water inlet and outlet connect to threaded pipes, while the flue outlet is located at the top.
- Nominal heat output: 31298 kcal/h
- Total output: 36.4 kW (33.2 + 3.2 kW)
- Energy class: A
- Efficiency: 77.6%
- Fuel: Wood and coal (briquettes)
- Maximum operating pressure: 1.5 bar
- Flue gas temperature: 301 °C
- CO emissions: 0.0825%, 1,110 mg/m³
- Ash emissions: 33.92 mg/Nm³
- CxHy emissions: 50.77 mg/Nm³
- NOx emissions: 136 mg/Nm³
- Minimum clearances from combustible materials: 80 cm at the front, 40 cm at the rear, 40 cm at the side, 60 cm above
- Flue diameter: 150 cm
- Combustion chamber dimensions (W × D × H): 43 × 39 × 44 cm
- Appliance dimensions (W × D × H): 57 × 51 × 125 cm
- Weight: 177 kg
Dimensions
- Nominal Power Output Rate
- 31298 kcal/h
- Placement
- Floor
- Individual Unit
- No
- Condensation
- No
- Pyrolysis
- No
- Air Duct Boiler
- No
- with Burner
- No
Provision
- Petroleum
- No
- Gas
- No
- Of Wood
- Yes
- Pellet
- No
- Electric Current
- No
- Biomass
- No
Energy Label
- Energy Class
- -
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.