To ensure the correct adhesion of the product, the surface must be cleaned of dust, grease, oils, peeling old paint, rust, mold residues, or moisture.

Prime the surface with the corresponding recommended primer of the product (Primer, Chassis coat, Velatura). Shake the product well and apply it to the surface. The product acquires all its mechanical strength after 20 - 30 days.

Application conditions:

• Avoid applying the product at temperatures below 6°C and above 40°C, and when the relative humidity is greater than 80%.
• Adverse conditions during application can alter the final properties of the product.

Application tools:

• Brush
• Roller

During the work, keep the tools “wet” inside the container. Thoroughly drain the product from the tools and clean them immediately with White spirit. If the product dries, it can only be removed with strong detergents. Do not pour the washing liquids into the groundwater.

Yield: 12-15m2 / L on suitably prepared surfaces.

Thinning:

• 1 - 5% White spirit

Drying: 1 - 2 hours depending on the application conditions.