I will start by saying that my router has Chinese firmware and I have had it for six months.
In terms of hardware, it is fantastic. Even though I don't have "many" devices (20 connected at the moment), it has never gotten stuck. I had to restart it once after a blackout.
The signal strength is very strong. With ax200 in the next room, one wall+bookshelf+TV in between, I get a nominal connection of 1300Mbps and 430Mbps iperf3 with my RPi connected to the ax3600's LAN port.
It is a bit lacking in terms of ports (3x Gbit ports, no USB), but the price for such hardware is still very good.
The software is what prevents me from giving it 5 stars. It has very limited capabilities, even though it is based on Openwrt. The positive aspects are that it has QoS (although I haven't tested it much because I am on double NAT) and you can see the devices/speeds through the app even when you are away from home. It lacks many features in the GUI (VLAN, network interfaces, etc.) that I would appreciate. Some things can be enabled through exploits and SSH, but it is a complex process.
For regular users, it is very good. I imagine the European version might have slightly weaker WiFi, so keep that in mind.
For power users, I probably wouldn't recommend it as a router. I ordered an edgerouter and will use the ax3600 as an access point only. The ironic part is that the edgerouter has much inferior hardware (IPQ8071A 1.4GHz - 512MB vs MT7621AT 880MHz - 256MB), but what can you do.
edit
After testing, I gave the edgerouter and kept the ax3600 as the router. The QoS works just as well, the ax3600 retains less bandwidth than the edgerouter and doesn't struggle at all. I also added a thousand switch. The only thing I would like and is missing is the ability to assign different IPs to the ports.
Θα ξεκινήσω λέγοντας ότι το ρούτερ μου έχει το κινέζικο firmware και το έχω έξι μήνες.
Από hardware είναι φανταστικό. Αν και δεν έχω "πολλές" συσκευές (20 συνδεδεμένες αυτή τη στιγμή) δεν έχει σκαλώσει ποτέ. Μία φορά χρειάστηκε να κάνω restart και ήταν μετά από blackout.
Πολύ δυνατό σήμα. Με ax200 σε διπλανο δωμάτιο, ένας τοίχος+βιβλιοθήκη+τηλεόραση ενδιάμεσα 1300Mbps ονομαστική σύνδεση, 430Mbps iperf3 με RPi μου πάνω σε lan port του ax3600.
Είναι λίγο λειψό με τα ports του (3x Gbit ports, καμία USB) αλλά η τιμή για τέτοιο hardware είναι πολύ καλή ακόμα και έτσι.
Το software είναι αυτό που με σταματάει από το να του δώσω 5 αστέρια. Είναι πολύ λίγες οι δυνατότητες αν και βασισμένο σε Openwrt. Θετικά είναι ότι εχει QoS (αν και δεν το πολυδοκίμασα γιατί είμαι σε double NAT) και μπορείς να δεις μέσω της εφαρμογής τις συσκευές/ταχύτητες και όταν είσαι εκτός σπιτιού. Λοίπουν πολλά από το GUI (΄VLAN, network interfaces κτλ) που θα εκτιμούσα. Κάποια πράγματα μπορείς μέσω exploits και SSH να τα ενεργοποιήσεις αλλά είναι πολύπλοκη διαδικασία.
Για απλούς χρήστες είναι πολύ καλό. Φαντάζομαι το ευρωπάικο θα είναι λίγο κομμένο ώς προς την ένταση του wifi, οπότε να το λάβετε υπόψιν.
Για power users, σαν ρούτερ μάλλον δεν το συνιστώ. Παράγγειλα ένα edgerouter και θα χρησιμοποιήσω το ax3600 σαν access point μόνο. To ειρωνικό είναι ότι το edgerouter έχει πολύ υποδεέστερο hardware (IPQ8071A 1.4GHz - 512MB vs MT7621AT 880MHz -256MB.) αλλά τι να κάνεις.
edit
Μετά από δοκιμές. έδωσα το edgerouter και άφησα το ax3600 να εκτελεί χρέη ρούτερ. Το QoS δουλεύει εξίσου καλά, το ax3600 κρατάει λιγότερο bandwidth από το edgerouter και δε ζορίζεται καθόλου. Έβαλα και ένα χιλιάρι switch. Το μόνο που θα ήθελα και λείπει είναι η δυνατότητα να κάνω είναι assign διαφορετικά IP στα ports.