Isomat Durocret Plus is a resin-modified, fibre-reinforced cement mortar, supplied ready-mixed and classified as PCC R3 repair mortar according to EN 1504-3. It is used to repair concrete, masonry and plaster, and to form coves, both indoors and outdoors.
It offers good adhesion to the substrate, abrasion resistance and watertightness. Apply with a trowel after mixing with water, and use in layers up to 3 cm thick over large areas or up to 5 cm thick for local repairs. Clean and dampen the substrate before application.
- Type: Resin-modified, fibre-reinforced cement repair mortar
- Use: Interior and exterior
- Classification: PCC R3 according to EN 1504-3
- Colour: Grey
- Grain size: Up to 1.3 mm
- Compressive strength: ≥ 25.0 N/mm²
- Flexural strength: ≥ 7.0 N/mm²
- Modulus of elasticity: ≥ 15 GPa
- Adhesion: ≥ 1.7 N/mm²
- Adhesion after 50 freeze-thaw cycles: ≥ 1.5 N/mm²
- Chloride content: 0.00%
- Capillary water absorption: 0.34 kg·m⁻²·h⁻⁰·⁵
- Reaction to fire: Euroclass A1
- Pot life: 4 h at +20 °C
- Water requirement: 4.60 l per 25 kg bag
- Apparent density of dry mortar: 1.45 kg/l
- Apparent density of wet mortar: 1.90 kg/l
- Consumption: Approximately 16 kg/m² per cm of layer thickness
- Consumption for coves: 1.9–2.7 kg/m for a side length of 5–6 cm
- Application temperature: At least +5 °C
- Environmental Product Declaration: EPD-IES-0009183
- Weight: 5 kg
- Type
- Cement mortar
- Weight
- 5 kg
- Pressed Cement Mortar
- -
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.