Skroutz.gr

Wurth Liquid Glue Instant Klebfix 2C 12ml Transparent
Craft Adhesives

Wurth Liquid Glue Instant Klebfix 2C 12ml Transparent Code: 0893093090

Transparent flexible instant adhesive 2-component for gap filling.

  • General purpose
  • Excellent adhesion on a wide variety of surfaces.
  • Literally transparent PMMA joints.
  • High gap filling capability with...

Transparent flexible instant adhesive 2-component for gap filling.

  • General purpose
  • Excellent adhesion on a wide variety of surfaces.
  • Literally transparent PMMA joints.
  • High gap filling capability with minimal shrinkage.
  • Strong initial bond
  • Mechanically processable.
Instructions for use:
  • The surface must be dry and free from dust and grease.
  • Insert the push rod and...
See Description & Specifications See Description & Specifications
38 00 €
38 Coins 38 Coins
Delivery by Wed, 16 Sep
2,50 € to a Skroutz Point
Do you want it on Tuesday with Free shipping?
From Afoi Papaioannou 4.9 (13)
4.9 (13 reviews)
Αθήνα, Αττικής
In-store pickup available
3 pieces
See Craft Supplies on the page of Afoi Papaioannou
Questions
Review the product
Product report

Description & Specifications

Transparent flexible instant adhesive 2-component for gap filling.

  • General purpose
  • Excellent adhesion on a wide variety of surfaces.
  • Literally transparent PMMA joints.
  • High gap filling capability with minimal shrinkage.
  • Strong initial bond
  • Mechanically processable.
Instructions for use:
  • The surface must be dry and free from dust and grease.
  • Insert the push rod and then unscrew the cap and screw on a mixer. The first 1 to 2 cm of the adhesive mixture should not be used.
  • Then immediately apply the adhesive to one of the two parts to be bonded and join them within 1 minute. After the two substrates are joined, allow an additional 15-30 seconds for repositioning (depending on the material). The joint must be uniformly pressed/stabilized in place. The curing time is the time it takes for the adhesive to cure a weight of 3 kg for 10 seconds in a bonding area of 250 mm². The curing time depends on the substrate (see table in the technical data sheet).
  • After about 5 minutes, good initial strength is achieved, after 10 minutes good strength is achieved, and after 24 hours final strength is achieved. However, the setting time depends on the temperature.
  • If you want to continue using the mixer, reuse the adhesive within 2 minutes or discard a few drops from the mixing tube so that it does not clog with cured material. If work is interrupted for more than 2 minutes, the mixing tube must be replaced.
  • When finished, remove the mixer and screw the sealing cap back in place.

Manufacturer

Manufacturer Details

Warnings & Safety Information
Product Number
0893093090

Specifications

Use
General Use

Use

General Use

Adhesive that can be applied to various materials such as paper, plastic, wood, glass, metal, leather, etc.
Type
Liquid
Type
Superglue

Type

Superglue

Cyan acrylic or instant adhesives offer fast bonding of materials such as metal, plastic, fabric, glass, wood, and paper.
No Solvents
No

No Solvents

The composition of the glue is environmentally friendly as it is water-based and not solvent-based, making it safe and easy to use. It has minimal to no scent and can be easily removed.

Quantity

Weight
10 gr
Capacity
12 ml
Quantity
1 pcs

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

38,00 €
2,50 € to a Skroutz Point