The Sonne Phaethon solar water heater uses triple energy and features a 120 L copper storage tank. Its low-profile selective horizontal collector has an absorber area of 1.68 m², with a titanium oxide-coated aluminum absorber and a copper tube grid.
The storage tank consists of two copper shells joined by a single welded seam, while the copper jacket is free of impurities. The expanded polyurethane insulation is 60 mm thick and has a thermal conductivity of 0.0180 W/mK. The collector has an aluminum frame and rock wool insulation on the back and sides.
- Capacity: 120 L
- Storage tank material: Copper
- Collector type: Selective
- Collector area: 1.68 m²
- Operation: Triple-energy
- Profile: Low
- Collector orientation: Horizontal
- Storage tank weld: Single seam
- Jacket material: Pure copper
- Water inlet and outlet pipes: Copper, Ø 21 × 2.2 mm, with ½″ thread
- Closed-circuit safety valve port: Copper pipe with ½″ thread
- Storage tank insulation: Expanded polyurethane, density 44 kg/m³ and thickness 60 mm
- Insulation thermal conductivity: 0.0180 W/mK
- Absorber: 0.5 mm-thick aluminum with a titanium oxide coating
- Collector tube grid: Copper
- Collector frame: Aluminum
- Collector insulation: Rock wool, density 50 kg/m³, on the back and sides
- Electric heating element: With single-pole control thermostat and double-pole protection
- Heating element flange: 3 mm-thick brass, threaded for 8 bolts
- Side covers: Press-fitted and snap-on
- Product Number
- 017-080
Dimensions
- Nominal Capacity
- 120 lt
- Container Material
- Copper
- Operation Mode
- Triple Energy
- Collector Type
- Selective
- Titanium Collector
- No
- Collector Surface
- 1.68 m²
- Roof Tile
- No
- Low Height
- Yes
- Horizontal Collector
- Yes
- Compact
- No
- Heat Pump
- No
- Wi-Fi
- No
Energy Label
- Energy Class
- -
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.