Skroutz.gr

D-Link Nuclias Connect AC1200 Wave 2 Wall-Plate Access Point Dual Band (2.4 & 5GHz)
Access Points

D-Link Nuclias Connect AC1200 Wave 2 Wall-Plate Access Point Dual Band (2.4 & 5GHz)

Access Point D-Link DAP-2622

  • Color: White
  • Connections: RJ45 Ethernet LAN RJ45 x 3
  • Frequency: 2.4 GHz, 5 GHz
  • Connectivity: PoE, QoS
  • Speed: 300 Mbps, 867 Mbps, 1200 Mbit/s
  • Type: Access Point
  • Plug Type:...

Access Point D-Link DAP-2622

  • Color: White
  • Connections: RJ45 Ethernet LAN RJ45 x 3
  • Frequency: 2.4 GHz, 5 GHz
  • Connectivity: PoE, QoS
  • Speed: 300 Mbps, 867 Mbps, 1200 Mbit/s
  • Type: Access Point
  • Plug Type: EU Plug
  • Features: LED Indicator
  • Antenna Type: Internal
  • Insulation: Insulation
  • Connection: PoE
  • Humidity Operating Range: 10 % - 90 %
  • Operating Temperature...
See full description See full description

Top specs

  • Maximum WLAN Speed

    Theoretical maximum speed with one wirelessly connected device, mainly used for marketing purposes. The speed that each connected device will have depends on the distance, obstacles, how many other devices are connected, how many other networks exist in the same area, etc.

  • Ethernet Ports

    Wired connection capability through an Ethernet network port. It allows connection via Ethernet cable, ensuring a stable and reliable connection, high data transfer speeds, and reduced interference compared to Wi-Fi.

  • Frequency

    The frequencies at which the Access Point can transmit.
    2. Additional frequencies allow for greater speed on more devices.

    Dual Band (2.4 & 5GHz)

    They transmit signals on two frequencies. They offer higher speeds compared to single and connect more devices. The 2.4Ghz frequency is the most common and, as it has a large range, is usually congested by neighboring Wi-Fi signals, making communication between devices more difficult. The 5Ghz provides higher speeds than the 2.4Ghz but is more sensitive to obstacles (e.g. walls) that reduce its range. This difference, as well as its more limited use, helps to have fewer interferences from other networks.
  • See all
103 40 €
104 Coins 104 Coins
Delivery Tomorrow
Free   shipping cost
From ΝΕTCORE
Παιανία, Αττικής
In-store pickup available
1 piece
See Networking on the page of ΝΕTCORE
What if it breaks?

You're covered by the statutory 2-year warranty. Contact us and we'll handle the entire process with the store, ensuring your issue is resolved with prompt support through a repair, replacement, or refund.

What if I change my mind?

No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.

You can select additional services after adding the product to the cart.
Review the product
Product report

Description

Description

Access Point D-Link DAP-2622

  • Color: White
  • Connections: RJ45 Ethernet LAN RJ45 x 3
  • Frequency: 2.4 GHz, 5 GHz
  • Connectivity: PoE, QoS
  • Speed: 300 Mbps, 867 Mbps, 1200 Mbit/s
  • Type: Access Point
  • Plug Type: EU Plug
  • Features: LED Indicator
  • Antenna Type: Internal
  • Insulation: Insulation
  • Connection: PoE
  • Humidity Operating Range: 10 % - 90 %
  • Operating Temperature Range: 0º / 40º
  • Power Consumption: 9.5 kWh

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Technical Specifications

Frequency
Dual Band (2.4 & 5GHz)

Frequency

The frequencies at which the Access Point can transmit.
2. Additional frequencies allow for greater speed on more devices.

Dual Band (2.4 & 5GHz)
They transmit signals on two frequencies. They offer higher speeds compared to single and connect more devices. The 2.4Ghz frequency is the most common and, as it has a large range, is usually congested by neighboring Wi-Fi signals, making communication between devices more difficult. The 5Ghz provides higher speeds than the 2.4Ghz but is more sensitive to obstacles (e.g. walls) that reduce its range. This difference, as well as its more limited use, helps to have fewer interferences from other networks.
Maximum WLAN Speed
1200 Mbps

Maximum WLAN Speed

Theoretical maximum speed with one wirelessly connected device, mainly used for marketing purposes. The speed that each connected device will have depends on the distance, obstacles, how many other devices are connected, how many other networks exist in the same area, etc.
IEEE Networking Standards
802.3at
LAN speed
1000 Mbps
Wi-Fi Mesh Network
No

Wi-Fi Mesh Network

Technology that allows the creation of a unified, flexible network where multiple Access Points work together to provide broader and more stable Wi-Fi coverage. Ideal for large homes, offices, and businesses.
Ethernet Backhaul
No

Ethernet Backhaul

The wired connection between access points using an Ethernet cable, so that their communication does not burden the wireless network. It offers greater stability, higher speeds, and better coverage compared to wireless backhaul.
PoE Support
PoE+
MIMO Technology
2x2

MIMO Technology

Technology that uses multiple antennas for simultaneous sending and receiving of data. This improves the speed and stability of Wi-Fi, especially when there are many connected devices.

General Characteristics

Placement
Indoor
Ethernet Ports
1

Ethernet Ports

Wired connection capability through an Ethernet network port. It allows connection via Ethernet cable, ensuring a stable and reliable connection, high data transfer speeds, and reduced interference compared to Wi-Fi.
Packaging
Single Kit

Installation Type

Ceiling
No

Ceiling

Ceiling installation for uniform coverage of the area from above. Ideal for offices, shops, and professional spaces.
Wall
Yes

Wall

Wall mounting for targeted coverage of specific areas or rooms. Suitable for more flexible installations.
Board games
No

Board games

Placement on a surface (e.g. desk or shelf) without permanent installation. Ideal for easy use and quick setup.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications
Questions

Questions

Do you have a question about the product?

Those users who have this product can help you

Ask for the product

Description & Specifications

Access Point D-Link DAP-2622

  • Color: White
  • Connections: RJ45 Ethernet LAN RJ45 x 3
  • Frequency: 2.4 GHz, 5 GHz
  • Connectivity: PoE, QoS
  • Speed: 300 Mbps, 867 Mbps, 1200 Mbit/s
  • Type: Access Point
  • Plug Type: EU Plug
  • Features: LED Indicator
  • Antenna Type: Internal
  • Insulation: Insulation
  • Connection: PoE
  • Humidity Operating Range: 10 % - 90 %
  • Operating Temperature Range: 0º / 40º
  • Power Consumption: 9.5 kWh

Manufacturer

Manufacturer Details

Warnings & Safety Information

Technical Specifications

Frequency
Dual Band (2.4 & 5GHz)

Frequency

The frequencies at which the Access Point can transmit.
2. Additional frequencies allow for greater speed on more devices.

Dual Band (2.4 & 5GHz)
They transmit signals on two frequencies. They offer higher speeds compared to single and connect more devices. The 2.4Ghz frequency is the most common and, as it has a large range, is usually congested by neighboring Wi-Fi signals, making communication between devices more difficult. The 5Ghz provides higher speeds than the 2.4Ghz but is more sensitive to obstacles (e.g. walls) that reduce its range. This difference, as well as its more limited use, helps to have fewer interferences from other networks.
Maximum WLAN Speed
1200 Mbps

Maximum WLAN Speed

Theoretical maximum speed with one wirelessly connected device, mainly used for marketing purposes. The speed that each connected device will have depends on the distance, obstacles, how many other devices are connected, how many other networks exist in the same area, etc.
IEEE Networking Standards
802.3at
LAN speed
1000 Mbps
Wi-Fi Mesh Network
No

Wi-Fi Mesh Network

Technology that allows the creation of a unified, flexible network where multiple Access Points work together to provide broader and more stable Wi-Fi coverage. Ideal for large homes, offices, and businesses.
Ethernet Backhaul
No

Ethernet Backhaul

The wired connection between access points using an Ethernet cable, so that their communication does not burden the wireless network. It offers greater stability, higher speeds, and better coverage compared to wireless backhaul.
PoE Support
PoE+
MIMO Technology
2x2

MIMO Technology

Technology that uses multiple antennas for simultaneous sending and receiving of data. This improves the speed and stability of Wi-Fi, especially when there are many connected devices.

General Characteristics

Placement
Indoor
Ethernet Ports
1

Ethernet Ports

Wired connection capability through an Ethernet network port. It allows connection via Ethernet cable, ensuring a stable and reliable connection, high data transfer speeds, and reduced interference compared to Wi-Fi.
Packaging
Single Kit

Installation Type

Ceiling
No

Ceiling

Ceiling installation for uniform coverage of the area from above. Ideal for offices, shops, and professional spaces.
Wall
Yes

Wall

Wall mounting for targeted coverage of specific areas or rooms. Suitable for more flexible installations.
Board games
No

Board games

Placement on a surface (e.g. desk or shelf) without permanent installation. Ideal for easy use and quick setup.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

103,40 €
Free   shipping cost