Skroutz.gr

Ingco Welding Machine Inverter TIG / MAG / MIG / MMA with Maximum Welding Current 160A and Duty Cycle 30%
Welding Machines

Ingco Welding Machine Inverter TIG / MAG / MIG / MMA with Maximum Welding Current 160A and Duty Cycle 30%

Key features:

  • Voltage: 220-240V
  • Insulation Class: H
  • Frequency: 50/60Hz
  • Electrode Size: 1.6-4.0mm
  • Protection Level: IP21S
  • Performance: 160A / 30%
See full description

  • Welding Current

    160

    Suitable for use in medium-thickness metal constructions and pipelines.

  • Duty Cycle

    The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

    2.

    For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.

  • Power Supply Voltage

    240

    It is the supply voltage that the machine requires from the electrical grid.
  • See all
365 00 €
365 Coins 365 Coins
Delivery Wed, 01 Jul - Fri, 03 Jul
Free   shipping cost
From Mplanas 5.0 (49)
5.0 (49 reviews)
Τρίκαλα, Τρικάλων
1 piece
See Tools on the page of Mplanas
What if it breaks?

You have at least a 2-year warranty. Contact us by phone and we will immediately take care of the repair, replacement or refund of your money, completely free of charge.

What if I change my mind?

No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.

Review the product
Product report

Description

Description

Capabilities

Inverter welding machine MMA / MIG / TIG from the manufacturer Ingco, where the inverter technology enhances the performance and durability of the machine and helps reduce its weight. The MMA electrode method creates thick and strong welds without needing an external gas supply, making it ideal for welding outside the workshop. The MIG method requires the wire to have a special coating (flux) otherwise it needs to be connected to an external gas cylinder (e.g., argon, CO2). The MAG method creates welds with a gas supply, making it ideal for indoor welding. The TIG method is suitable for slow welding on aluminum and stainless steel that requires detailed work and does not create splashes. It can operate continuously for 3 minutes at 160A before needing to stop to cool down. Therefore, you may need more time to melt thicker wires and make more passes on thick welds due to the low maximum amperage it supports. Its weight reaches 12kg.

Features

  • Inverter TIG Welding Machine
  • Insulation Class: H
  • Input Voltage (V): 1 ~ 220-240
  • Output Current (A): 10-160
  • Frequency (HZ): 50/60
  • No-load Voltage (V): 80
  • Duty Cycle (%): 30% @ 160A
  • LCD Display
  • Protection Level: IP21S
  • Welding Wire Size: 0.8 - 1.0mm
  • Electrode Diameter (mm): 1.6 - 4.0mm

What's included:

  • With 1 set of cables (clamp and body)
  • With 1 wire brush
  • With 1 mask
  • Weight: 12 Kg

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
TIG, MAG, MIG, MMA

Type

TIG

Slow welding for detailed work on aluminum and stainless steel, mainly. Requires experience and connection to an external gas cylinder. Does not create "spatters".

MIG

The easiest welding method even for a beginner. 2. If the wire to be used does not have a special coating (flux), it should be connected to an external gas cylinder (e.g. argon, CO2).

MMA

Creates thick and strong bonds without the need for external gas supply, making it ideal for out-of-lab welding.
Welding Current (max)
160 A

Welding Current (max): 160


Suitable for use in medium-thickness metal constructions and pipelines.
Operation Cycle (max Ampere)
30 %

Operation Cycle (max Ampere)

The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

2.

For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
Supply Voltage
240 V

Supply Voltage: 240


It is the supply voltage that the machine requires from the electrical grid.
Maximum Electrode Diameter
4 mm

Maximum Electrode Diameter: 4


The maximum electrode thickness that the machine can support, depending on the maximum current it can provide.
Maximum Wire Diameter
1 mm

Maximum Wire Diameter: 1


The maximum wire thickness that the machine's wire feed can support, depending on the current intensity it can provide.
Weight
12000 gr

Additional Features

Inverter
Yes

Inverter


New technology welding. Very good in terms of performance, durability, and weight, but with a high cost of repair in case of damage. They have automation for better and safer work. If connected to a generator, it is recommended to choose one with 8kVA or more.
IGBT
Yes

IGBT


Allows the conversion of direct current (DC) voltage to alternating current (AC) or the output of direct current at a higher or lower intensity.
VRD
No
with Voltage Stabilizer
No
for Generator with AVR
No

Features

Hot Start
No
Anti Stick
No
Arc Force
No
2T Operation
No
4T Mode
No
Spot Function
No
Pulsed
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications
Questions

Questions

Do you have a question about the product?

2 users have this product and can help you

Ask for the product

Description & Specifications

Capabilities

Inverter welding machine MMA / MIG / TIG from the manufacturer Ingco, where the inverter technology enhances the performance and durability of the machine and helps reduce its weight. The MMA electrode method creates thick and strong welds without needing an external gas supply, making it ideal for welding outside the workshop. The MIG method requires the wire to have a special coating (flux) otherwise it needs to be connected to an external gas cylinder (e.g., argon, CO2). The MAG method creates welds with a gas supply, making it ideal for indoor welding. The TIG method is suitable for slow welding on aluminum and stainless steel that requires detailed work and does not create splashes. It can operate continuously for 3 minutes at 160A before needing to stop to cool down. Therefore, you may need more time to melt thicker wires and make more passes on thick welds due to the low maximum amperage it supports. Its weight reaches 12kg.

Features

  • Inverter TIG Welding Machine
  • Insulation Class: H
  • Input Voltage (V): 1 ~ 220-240
  • Output Current (A): 10-160
  • Frequency (HZ): 50/60
  • No-load Voltage (V): 80
  • Duty Cycle (%): 30% @ 160A
  • LCD Display
  • Protection Level: IP21S
  • Welding Wire Size: 0.8 - 1.0mm
  • Electrode Diameter (mm): 1.6 - 4.0mm

What's included:

  • With 1 set of cables (clamp and body)
  • With 1 wire brush
  • With 1 mask
  • Weight: 12 Kg

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
TIG, MAG, MIG, MMA

Type

TIG

Slow welding for detailed work on aluminum and stainless steel, mainly. Requires experience and connection to an external gas cylinder. Does not create "spatters".

MIG

The easiest welding method even for a beginner. 2. If the wire to be used does not have a special coating (flux), it should be connected to an external gas cylinder (e.g. argon, CO2).

MMA

Creates thick and strong bonds without the need for external gas supply, making it ideal for out-of-lab welding.
Welding Current (max)
160 A

Welding Current (max): 160


Suitable for use in medium-thickness metal constructions and pipelines.
Operation Cycle (max Ampere)
30 %

Operation Cycle (max Ampere)

The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

2.

For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
Supply Voltage
240 V

Supply Voltage: 240


It is the supply voltage that the machine requires from the electrical grid.
Maximum Electrode Diameter
4 mm

Maximum Electrode Diameter: 4


The maximum electrode thickness that the machine can support, depending on the maximum current it can provide.
Maximum Wire Diameter
1 mm

Maximum Wire Diameter: 1


The maximum wire thickness that the machine's wire feed can support, depending on the current intensity it can provide.
Weight
12000 gr

Additional Features

Inverter
Yes

Inverter


New technology welding. Very good in terms of performance, durability, and weight, but with a high cost of repair in case of damage. They have automation for better and safer work. If connected to a generator, it is recommended to choose one with 8kVA or more.
IGBT
Yes

IGBT


Allows the conversion of direct current (DC) voltage to alternating current (AC) or the output of direct current at a higher or lower intensity.
VRD
No
with Voltage Stabilizer
No
for Generator with AVR
No

Features

Hot Start
No
Anti Stick
No
Arc Force
No
2T Operation
No
4T Mode
No
Spot Function
No
Pulsed
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

365,00 €
Free   shipping cost