Hellvape presents the V3 version of the very famous Dead Rabbit! The Dead Rabbit V3 RDA has a diameter of 24 mm, the dripper can be installed on most boxes and mods on the market. The Dead Rabbit V3...
Hellvape presents the V3 version of the very famous Dead Rabbit! The Dead Rabbit V3 RDA has a diameter of 24 mm, the dripper can be installed on most boxes and mods on the market. The Dead Rabbit V3 features finishes that are close to perfection. Hellvape allows vapers to have excellent products at an unbeatable price.
You have at least a 2-year warranty. Contact us by phone and we will immediately take care of the repair, replacement or refund of your money, completely free of charge.
What if I change my mind?
No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.
Hellvape presents the V3 version of the very famous Dead Rabbit! The Dead Rabbit V3 RDA has a diameter of 24 mm, the dripper can be installed on most boxes and mods on the market. The Dead Rabbit V3 features finishes that are close to perfection. Hellvape allows vapers to have excellent products at an unbeatable price.
The Dead Rabbit V3 has a large and innovative deck with four diagonal mounting positions for easy installation of large diameter dual coils. To fully utilize the Dead Rabbit V3, Hellvape has equipped its RDA with adjustable airflow. The Dead Rabbit V3 fits perfectly with bottom feeders and bottom feeders with BF pin.
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.
This review is about the manufacturer colour: Silver
What can we say now,
With about 20 euros, no one can do the job.
Let others ask for 200 euros for an RDA....
Buy them with your eyes closed and don't waste your money....
P.S. if you like this kind of vaping, of course
Τι να λέμε τώρα ,
Με 20 ευρώ περίπου κανείς δουλειά .
Αφήστε τους άλλους να ζητάνε 200ευρα για έναν RDA ....
Με κλειστά τα μάτια αγοράστε των και μην πετάτε τα λεφτά σας ....
Υ.Γ αν σας αρέσει εννοείτε αυτού του είδους ατμισμα
I am a beginner in RDAs. I installed the coils and cotton, but the liquid was spitting upwards like crazy. Later, I learned that I had used too much cotton and filled the entire deck with it, when in fact the cotton should only touch the deck to avoid oversaturation and spitting, as shown in the coil building video I provided. I trimmed the excess cotton (without replacing it) and the situation improved significantly after a few puffs. The method below also helped me a lot with the common issue beginners face with rebuildable coils, as if the wick sits inactive at the beginning, it will still spit. The YouTube video mentions the same thing at the beginning. So, with the method below, it works perfectly. Lower wattages can also lead to boiling of the liquid instead of quick vaporization. With the coils I have, I set it to 24W. Rebuildable coils, dripping, and the wide 810 drip tip can lead to spitback, especially for beginners.
"Regarding over saturation, a pro tip I picked up from Reddit to help fix this issue if you’re experiencing this: if your device has an air flow adjuster, set it to full open and then activate the device and blow INTO it instead of drawing out the vapor. The vapor will disperse through the air flow and if you do this a few times it should help to clear out some of the oversaturated juice."
Experienced users know this, but even pre-built coils need a little adjustment of the legs when placing them on the posts with a screwdriver, otherwise they touch each other. The coils were labeled above 0.37Ω, so my device recognized them as parallel coils at around 0.19Ω (depending on the placement height). Finally, the part of the atomizer with the logo (the rabbit) has two notches on the inner side that allow for a 90-degree movement in relation to the deck, so that the airflow aligns parallel to the coils and doesn't get blocked by the cotton.
Coming from the Innokin Zlide, I have to say that I enjoy a better flavor. It is also difficult to burn the liquid if I increase the wattage a bit, as the cotton wicks a good amount of liquid. And with the Innokin, of course, if we stick to the recommended wattage by the coil manufacturer, we don't get a burnt taste.
I didn't even buy a dripping bottle, as I had a glass caramel bottle with a dropper from a store that sells herbal extracts, and I ran out of extract at some point. For transferring, I use a plastic pipette for DIY liquid
Είμαι αρχάριος σε RDAs. Πέρασα τις αντιστάσεις και το βαμβάκι και έφτυνε τρελά προς τα πάνω το υγρό. Μετά έμαθα ότι είχα βάλει πολύ βαμβάκι και είχα γεμίσει όλο το deck με αυτό, ενώ πρέπει ίσα-ίσα το βαμβάκι να ακουμπάει στο deck, αν έχουμε προβλήματα με υπερκορεσμό και φτύσιμο, όπως στο βίντεο coil building που παραθέτω. Έκοψα το περισσευούμενο το βαμβάκι (χωρίς να ξαναπεράσω καινούργιο) και βελτιώθηκε πάρα πολύ η κατάσταση μετά από αρκετές τζούρες. Ο παρακάτω τρόπος μου βελτίωσε επίσης πολύ το πρόβλημα μου, που είναι συχνό στους αρχάριους με rebuildable coils, καθώς αν κάτσει ανενεργό το φιτίλι στην αρχή πάλι φτύνει. Το βιντεάκι στο youtube αναφέρει το ίδιο στην αρχή. Έτσι με την παρακάτω μέθοδο έρχεται στα ίσια του. Και τα χαμηλά Watts μπορεί να οδηγήσουν σε βράσιμο του υγρού και όχι σε γρήγορη ατμοποίηση. Εγώ με τις αντιστάσεις που μου ήρθε το έχω στα 24W. Τα rebuildable coils, το dripping και το φαρδύ drip tip 810 μπορούν να οδηγήσουν σε spitback ειδικά σε αρχάριους.
"Regarding over saturation, a pro tip I picked up from Reddit to help fix this issue if you’re experiencing this: if your device has an air flow adjuster, set it to full open and then activate the device and blow INTO it instead of drawing out the vapour. The vapour will disperse through the air flow and if you do this a few times it should help to clear out some of the oversaturated juice"
https://www.youtube.com/watch?v=nKJ2TVroqAM
Οι έμπειροι το ξέρουν, αλλά οι αντιστάσεις ακόμα και αν είναι έτοιμες τυλιγμένες σε έλικα, προφανώς και θέλουν λίγο λύγισμα τα ποδαράκια κατά την τοποθέτηση στα posts με το κατσαβιδάκι, γιατί αλλιώς μου ακουμπούσαν η μία πάνω στην άλλη.
Οι αντιστάσεις γράφαν πάνω 0,37Ω, οπότε καλά μου αναγνώρισε η συσκευή μου την ισοδύναμη παράλληλη 2 αντιστάσεων στα 0,19Ω περίπου (ανάλογα και με το ύψος τοποθέτησης).
Τέλος, το τμήμα του ατμοποιητή με το λογότυπο (το κουνέλι) από την μέσα πλευρά έχει δύο δοντάκια που επιτρέπουν μια κίνηση 90 μοιρών περίπου σε σχέση με το deck, ώστε να φέρουμε τους αεραγωγούς παράλληλα με τις αντιστάσεις και να μην τους μπουκώνουν τα βαμβάκια.
Ερχόμενος από τον Innokin Zlide έχω να πω ότι απολαμβάνω καλύτερο άρωμα. Επίσης είναι δύσκολο να κάψω το υγρό αν ανεβάσω κάπως τα Watts, καθώς τα φιτίλια με βαμβάκι ρουφάνε αρκετή ποσότητα υγρού. Και στον Innokin βέβαια αν μείνουμε στα Watts που προτείνει ο κατασκευαστής των αντιστάσεων δεν έχουμε καμμένη γεύση.
Μπουκαλάκι για το dripping δεν αγόρασα καν καθώς είχα ένα γυάλινο καραμελέ με σταγονόμετρο από καταστήματα που πουλάνε βάμματα βοτάνων και μου τέλειωσε το βάμμα κάποτε. Για μετάγγιση χρησιμοποιώ μια πλαστική πιπέτα σε DIY υγρό.
https://www.skroutz.gr/s/30592796/%CE%A0%CE%B9%CF%80%CE%AD%CF%84%CE%B1-%CE%A0%CE%BB%CE%B1%CF%83%CF%84%CE%B9%CE%BA%CE%AE-%CE%91%CF%80%CE%BF%CF%83%CF%84%CE%B5%CE%B9%CF%81%CF%89%CE%BC%CE%AD%CE%BD%CE%B7-1ml-001482.html?from=catspan
My first RDA and I can say that I am very satisfied. It is very easy to set up and has 2 airflow options (open and honeycomb).
The only problem I had was the "muted" flavor and maybe my setup played a role. The simple Kanthal wire did not give me a strong flavor, as well as the placement I did by putting the coils relatively high. I did some research and found that due to its airflow, it requires a lower setup (just enough for the coils not to touch the bottom). Also, I tried the pre-made fused clapton coils and the flavor is great.
I highly recommend it, but along with a fused clapton wire for better flavor.
Ο πρώτος μου RDA και μπορώ να πω ότι είμαι πολύ ευχαριστημένη. Είναι πολύ εύκολος στο στήσιμο και έχει 2 επιλογές airflow (ανοιχτό και honeycomb).
Το μόνο πρόβλημα που είχα ήταν το "muted" flavor και ίσως έπαιζε ρόλο το στήσιμό μου. Το απλό Kanthal σύρμα δεν μου έβγαλε δυνατή γεύση, όπως επίσης η τοποθέτηση που έκανα καθώς έβαλα τις αντιστάσεις σχετικά ψηλά. Έψαξα αρκετά και είδα πως λόγω του airflow του θέλει χαμηλότερο στήσιμο (ίσα που να μην ακουμπάνε οι αντιστάσεις κάτω). Επίσης, δοκίμασα τις έτοιμες αντιστάσεις του που είναι fused clapton και η γεύση είναι κομπλέ.
Τον προτείνω ανεπιφύλακτα αλλά παρέα με ένα fused clapton σύρμα για καλύτερη γεύση.
Very good RDA, as an owner of the dead rabbit RDA I would say that if you have the V2, it's not worth getting it. However, in general, it is excellent if you are coming from another one, especially if it's not a dripper.
πολυ καλος rda σαν κατοχως ολων τον dead rabbit RDA θα ελεγα οτι εαν εχετε τον V2 δεν αξιζει να τον παρετε. Γενικα ομως ειναι εξεριτκος εαν ερχεστε απο καποιον αλλον και ειδικα εαν δεν ειναι dripper.
This review is about the manufacturer colour: Gun Metal
Another unique product from Hellvape that doesn't disappoint me! Very smooth draw with satisfactory space for further dripping, with the ability to use squonk and a very nice and sturdy construction! The honeycomb style airflow is on point, just like the slot airflow! Beautiful design and ideal for drippers enthusiasts!
A M A Z I N G - G E T I T N O W !!!!
Ακόμα ένα μοναδικό προϊόν από Hellvape που δεν με απογοητεύει! Πολύ smooth τζούρα με ικανοποιητικό χώρο για περαιτέρω dripping με δυνατότητα χρήσης squonk και πολύ ωραία και στιβαρή κατασκευή! Το honeycomb style airflow μετράει φουλ όπως και το slot airflow! Πανέμορφο design και ιδανικό για λάτρεις drippers!
Α Ψ Ο Γ Ο - Α Γ Ο Ρ Α Μ Ε Κ Λ Ε Ι Σ Τ Α Μ Α Τ Ι Α !!!!
What can we say now,
With about 20 euros, no one can do the job.
Let others ask for 200 euros for an RDA....
Buy them with your eyes closed and don't waste your money....
P.S. if you like this kind of vaping, of course
Τι να λέμε τώρα ,
Με 20 ευρώ περίπου κανείς δουλειά .
Αφήστε τους άλλους να ζητάνε 200ευρα για έναν RDA ....
Με κλειστά τα μάτια αγοράστε των και μην πετάτε τα λεφτά σας ....
Υ.Γ αν σας αρέσει εννοείτε αυτού του είδους ατμισμα
I am a beginner in RDAs. I installed the coils and cotton, but the liquid was spitting upwards like crazy. Later, I learned that I had used too much cotton and filled the entire deck with it, when in fact the cotton should only touch the deck to avoid oversaturation and spitting, as shown in the coil building video I provided. I trimmed the excess cotton (without replacing it) and the situation improved significantly after a few puffs. The method below also helped me a lot with the common issue beginners face with rebuildable coils, as if the wick sits inactive at the beginning, it will still spit. The YouTube video mentions the same thing at the beginning. So, with the method below, it works perfectly. Lower wattages can also lead to boiling of the liquid instead of quick vaporization. With the coils I have, I set it to 24W. Rebuildable coils, dripping, and the wide 810 drip tip can lead to spitback, especially for beginners.
"Regarding over saturation, a pro tip I picked up from Reddit to help fix this issue if you’re experiencing this: if your device has an air flow adjuster, set it to full open and then activate the device and blow INTO it instead of drawing out the vapor. The vapor will disperse through the air flow and if you do this a few times it should help to clear out some of the oversaturated juice."
Experienced users know this, but even pre-built coils need a little adjustment of the legs when placing them on the posts with a screwdriver, otherwise they touch each other. The coils were labeled above 0.37Ω, so my device recognized them as parallel coils at around 0.19Ω (depending on the placement height). Finally, the part of the atomizer with the logo (the rabbit) has two notches on the inner side that allow for a 90-degree movement in relation to the deck, so that the airflow aligns parallel to the coils and doesn't get blocked by the cotton.
Coming from the Innokin Zlide, I have to say that I enjoy a better flavor. It is also difficult to burn the liquid if I increase the wattage a bit, as the cotton wicks a good amount of liquid. And with the Innokin, of course, if we stick to the recommended wattage by the coil manufacturer, we don't get a burnt taste.
I didn't even buy a dripping bottle, as I had a glass caramel bottle with a dropper from a store that sells herbal extracts, and I ran out of extract at some point. For transferring, I use a plastic pipette for DIY liquid
Είμαι αρχάριος σε RDAs. Πέρασα τις αντιστάσεις και το βαμβάκι και έφτυνε τρελά προς τα πάνω το υγρό. Μετά έμαθα ότι είχα βάλει πολύ βαμβάκι και είχα γεμίσει όλο το deck με αυτό, ενώ πρέπει ίσα-ίσα το βαμβάκι να ακουμπάει στο deck, αν έχουμε προβλήματα με υπερκορεσμό και φτύσιμο, όπως στο βίντεο coil building που παραθέτω. Έκοψα το περισσευούμενο το βαμβάκι (χωρίς να ξαναπεράσω καινούργιο) και βελτιώθηκε πάρα πολύ η κατάσταση μετά από αρκετές τζούρες. Ο παρακάτω τρόπος μου βελτίωσε επίσης πολύ το πρόβλημα μου, που είναι συχνό στους αρχάριους με rebuildable coils, καθώς αν κάτσει ανενεργό το φιτίλι στην αρχή πάλι φτύνει. Το βιντεάκι στο youtube αναφέρει το ίδιο στην αρχή. Έτσι με την παρακάτω μέθοδο έρχεται στα ίσια του. Και τα χαμηλά Watts μπορεί να οδηγήσουν σε βράσιμο του υγρού και όχι σε γρήγορη ατμοποίηση. Εγώ με τις αντιστάσεις που μου ήρθε το έχω στα 24W. Τα rebuildable coils, το dripping και το φαρδύ drip tip 810 μπορούν να οδηγήσουν σε spitback ειδικά σε αρχάριους.
"Regarding over saturation, a pro tip I picked up from Reddit to help fix this issue if you’re experiencing this: if your device has an air flow adjuster, set it to full open and then activate the device and blow INTO it instead of drawing out the vapour. The vapour will disperse through the air flow and if you do this a few times it should help to clear out some of the oversaturated juice"
https://www.youtube.com/watch?v=nKJ2TVroqAM
Οι έμπειροι το ξέρουν, αλλά οι αντιστάσεις ακόμα και αν είναι έτοιμες τυλιγμένες σε έλικα, προφανώς και θέλουν λίγο λύγισμα τα ποδαράκια κατά την τοποθέτηση στα posts με το κατσαβιδάκι, γιατί αλλιώς μου ακουμπούσαν η μία πάνω στην άλλη.
Οι αντιστάσεις γράφαν πάνω 0,37Ω, οπότε καλά μου αναγνώρισε η συσκευή μου την ισοδύναμη παράλληλη 2 αντιστάσεων στα 0,19Ω περίπου (ανάλογα και με το ύψος τοποθέτησης).
Τέλος, το τμήμα του ατμοποιητή με το λογότυπο (το κουνέλι) από την μέσα πλευρά έχει δύο δοντάκια που επιτρέπουν μια κίνηση 90 μοιρών περίπου σε σχέση με το deck, ώστε να φέρουμε τους αεραγωγούς παράλληλα με τις αντιστάσεις και να μην τους μπουκώνουν τα βαμβάκια.
Ερχόμενος από τον Innokin Zlide έχω να πω ότι απολαμβάνω καλύτερο άρωμα. Επίσης είναι δύσκολο να κάψω το υγρό αν ανεβάσω κάπως τα Watts, καθώς τα φιτίλια με βαμβάκι ρουφάνε αρκετή ποσότητα υγρού. Και στον Innokin βέβαια αν μείνουμε στα Watts που προτείνει ο κατασκευαστής των αντιστάσεων δεν έχουμε καμμένη γεύση.
Μπουκαλάκι για το dripping δεν αγόρασα καν καθώς είχα ένα γυάλινο καραμελέ με σταγονόμετρο από καταστήματα που πουλάνε βάμματα βοτάνων και μου τέλειωσε το βάμμα κάποτε. Για μετάγγιση χρησιμοποιώ μια πλαστική πιπέτα σε DIY υγρό.
https://www.skroutz.gr/s/30592796/%CE%A0%CE%B9%CF%80%CE%AD%CF%84%CE%B1-%CE%A0%CE%BB%CE%B1%CF%83%CF%84%CE%B9%CE%BA%CE%AE-%CE%91%CF%80%CE%BF%CF%83%CF%84%CE%B5%CE%B9%CF%81%CF%89%CE%BC%CE%AD%CE%BD%CE%B7-1ml-001482.html?from=catspan
My first RDA and I can say that I am very satisfied. It is very easy to set up and has 2 airflow options (open and honeycomb).
The only problem I had was the "muted" flavor and maybe my setup played a role. The simple Kanthal wire did not give me a strong flavor, as well as the placement I did by putting the coils relatively high. I did some research and found that due to its airflow, it requires a lower setup (just enough for the coils not to touch the bottom). Also, I tried the pre-made fused clapton coils and the flavor is great.
I highly recommend it, but along with a fused clapton wire for better flavor.
Ο πρώτος μου RDA και μπορώ να πω ότι είμαι πολύ ευχαριστημένη. Είναι πολύ εύκολος στο στήσιμο και έχει 2 επιλογές airflow (ανοιχτό και honeycomb).
Το μόνο πρόβλημα που είχα ήταν το "muted" flavor και ίσως έπαιζε ρόλο το στήσιμό μου. Το απλό Kanthal σύρμα δεν μου έβγαλε δυνατή γεύση, όπως επίσης η τοποθέτηση που έκανα καθώς έβαλα τις αντιστάσεις σχετικά ψηλά. Έψαξα αρκετά και είδα πως λόγω του airflow του θέλει χαμηλότερο στήσιμο (ίσα που να μην ακουμπάνε οι αντιστάσεις κάτω). Επίσης, δοκίμασα τις έτοιμες αντιστάσεις του που είναι fused clapton και η γεύση είναι κομπλέ.
Τον προτείνω ανεπιφύλακτα αλλά παρέα με ένα fused clapton σύρμα για καλύτερη γεύση.
Hellvape presents the V3 version of the very famous Dead Rabbit! The Dead Rabbit V3 RDA has a diameter of 24 mm, the dripper can be installed on most boxes and mods on the market. The Dead Rabbit V3 features finishes that are close to perfection. Hellvape allows vapers to have excellent products at an unbeatable price.
The Dead Rabbit V3 has a large and innovative deck with four diagonal mounting positions for easy installation of large diameter dual coils. To fully utilize the Dead Rabbit V3, Hellvape has equipped its RDA with adjustable airflow. The Dead Rabbit V3 fits perfectly with bottom feeders and bottom feeders with BF pin.
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.
This review is about the manufacturer colour: Silver
What can we say now,
With about 20 euros, no one can do the job.
Let others ask for 200 euros for an RDA....
Buy them with your eyes closed and don't waste your money....
P.S. if you like this kind of vaping, of course
Τι να λέμε τώρα ,
Με 20 ευρώ περίπου κανείς δουλειά .
Αφήστε τους άλλους να ζητάνε 200ευρα για έναν RDA ....
Με κλειστά τα μάτια αγοράστε των και μην πετάτε τα λεφτά σας ....
Υ.Γ αν σας αρέσει εννοείτε αυτού του είδους ατμισμα
I am a beginner in RDAs. I installed the coils and cotton, but the liquid was spitting upwards like crazy. Later, I learned that I had used too much cotton and filled the entire deck with it, when in fact the cotton should only touch the deck to avoid oversaturation and spitting, as shown in the coil building video I provided. I trimmed the excess cotton (without replacing it) and the situation improved significantly after a few puffs. The method below also helped me a lot with the common issue beginners face with rebuildable coils, as if the wick sits inactive at the beginning, it will still spit. The YouTube video mentions the same thing at the beginning. So, with the method below, it works perfectly. Lower wattages can also lead to boiling of the liquid instead of quick vaporization. With the coils I have, I set it to 24W. Rebuildable coils, dripping, and the wide 810 drip tip can lead to spitback, especially for beginners.
"Regarding over saturation, a pro tip I picked up from Reddit to help fix this issue if you’re experiencing this: if your device has an air flow adjuster, set it to full open and then activate the device and blow INTO it instead of drawing out the vapor. The vapor will disperse through the air flow and if you do this a few times it should help to clear out some of the oversaturated juice."
Experienced users know this, but even pre-built coils need a little adjustment of the legs when placing them on the posts with a screwdriver, otherwise they touch each other. The coils were labeled above 0.37Ω, so my device recognized them as parallel coils at around 0.19Ω (depending on the placement height). Finally, the part of the atomizer with the logo (the rabbit) has two notches on the inner side that allow for a 90-degree movement in relation to the deck, so that the airflow aligns parallel to the coils and doesn't get blocked by the cotton.
Coming from the Innokin Zlide, I have to say that I enjoy a better flavor. It is also difficult to burn the liquid if I increase the wattage a bit, as the cotton wicks a good amount of liquid. And with the Innokin, of course, if we stick to the recommended wattage by the coil manufacturer, we don't get a burnt taste.
I didn't even buy a dripping bottle, as I had a glass caramel bottle with a dropper from a store that sells herbal extracts, and I ran out of extract at some point. For transferring, I use a plastic pipette for DIY liquid
Είμαι αρχάριος σε RDAs. Πέρασα τις αντιστάσεις και το βαμβάκι και έφτυνε τρελά προς τα πάνω το υγρό. Μετά έμαθα ότι είχα βάλει πολύ βαμβάκι και είχα γεμίσει όλο το deck με αυτό, ενώ πρέπει ίσα-ίσα το βαμβάκι να ακουμπάει στο deck, αν έχουμε προβλήματα με υπερκορεσμό και φτύσιμο, όπως στο βίντεο coil building που παραθέτω. Έκοψα το περισσευούμενο το βαμβάκι (χωρίς να ξαναπεράσω καινούργιο) και βελτιώθηκε πάρα πολύ η κατάσταση μετά από αρκετές τζούρες. Ο παρακάτω τρόπος μου βελτίωσε επίσης πολύ το πρόβλημα μου, που είναι συχνό στους αρχάριους με rebuildable coils, καθώς αν κάτσει ανενεργό το φιτίλι στην αρχή πάλι φτύνει. Το βιντεάκι στο youtube αναφέρει το ίδιο στην αρχή. Έτσι με την παρακάτω μέθοδο έρχεται στα ίσια του. Και τα χαμηλά Watts μπορεί να οδηγήσουν σε βράσιμο του υγρού και όχι σε γρήγορη ατμοποίηση. Εγώ με τις αντιστάσεις που μου ήρθε το έχω στα 24W. Τα rebuildable coils, το dripping και το φαρδύ drip tip 810 μπορούν να οδηγήσουν σε spitback ειδικά σε αρχάριους.
"Regarding over saturation, a pro tip I picked up from Reddit to help fix this issue if you’re experiencing this: if your device has an air flow adjuster, set it to full open and then activate the device and blow INTO it instead of drawing out the vapour. The vapour will disperse through the air flow and if you do this a few times it should help to clear out some of the oversaturated juice"
https://www.youtube.com/watch?v=nKJ2TVroqAM
Οι έμπειροι το ξέρουν, αλλά οι αντιστάσεις ακόμα και αν είναι έτοιμες τυλιγμένες σε έλικα, προφανώς και θέλουν λίγο λύγισμα τα ποδαράκια κατά την τοποθέτηση στα posts με το κατσαβιδάκι, γιατί αλλιώς μου ακουμπούσαν η μία πάνω στην άλλη.
Οι αντιστάσεις γράφαν πάνω 0,37Ω, οπότε καλά μου αναγνώρισε η συσκευή μου την ισοδύναμη παράλληλη 2 αντιστάσεων στα 0,19Ω περίπου (ανάλογα και με το ύψος τοποθέτησης).
Τέλος, το τμήμα του ατμοποιητή με το λογότυπο (το κουνέλι) από την μέσα πλευρά έχει δύο δοντάκια που επιτρέπουν μια κίνηση 90 μοιρών περίπου σε σχέση με το deck, ώστε να φέρουμε τους αεραγωγούς παράλληλα με τις αντιστάσεις και να μην τους μπουκώνουν τα βαμβάκια.
Ερχόμενος από τον Innokin Zlide έχω να πω ότι απολαμβάνω καλύτερο άρωμα. Επίσης είναι δύσκολο να κάψω το υγρό αν ανεβάσω κάπως τα Watts, καθώς τα φιτίλια με βαμβάκι ρουφάνε αρκετή ποσότητα υγρού. Και στον Innokin βέβαια αν μείνουμε στα Watts που προτείνει ο κατασκευαστής των αντιστάσεων δεν έχουμε καμμένη γεύση.
Μπουκαλάκι για το dripping δεν αγόρασα καν καθώς είχα ένα γυάλινο καραμελέ με σταγονόμετρο από καταστήματα που πουλάνε βάμματα βοτάνων και μου τέλειωσε το βάμμα κάποτε. Για μετάγγιση χρησιμοποιώ μια πλαστική πιπέτα σε DIY υγρό.
https://www.skroutz.gr/s/30592796/%CE%A0%CE%B9%CF%80%CE%AD%CF%84%CE%B1-%CE%A0%CE%BB%CE%B1%CF%83%CF%84%CE%B9%CE%BA%CE%AE-%CE%91%CF%80%CE%BF%CF%83%CF%84%CE%B5%CE%B9%CF%81%CF%89%CE%BC%CE%AD%CE%BD%CE%B7-1ml-001482.html?from=catspan
My first RDA and I can say that I am very satisfied. It is very easy to set up and has 2 airflow options (open and honeycomb).
The only problem I had was the "muted" flavor and maybe my setup played a role. The simple Kanthal wire did not give me a strong flavor, as well as the placement I did by putting the coils relatively high. I did some research and found that due to its airflow, it requires a lower setup (just enough for the coils not to touch the bottom). Also, I tried the pre-made fused clapton coils and the flavor is great.
I highly recommend it, but along with a fused clapton wire for better flavor.
Ο πρώτος μου RDA και μπορώ να πω ότι είμαι πολύ ευχαριστημένη. Είναι πολύ εύκολος στο στήσιμο και έχει 2 επιλογές airflow (ανοιχτό και honeycomb).
Το μόνο πρόβλημα που είχα ήταν το "muted" flavor και ίσως έπαιζε ρόλο το στήσιμό μου. Το απλό Kanthal σύρμα δεν μου έβγαλε δυνατή γεύση, όπως επίσης η τοποθέτηση που έκανα καθώς έβαλα τις αντιστάσεις σχετικά ψηλά. Έψαξα αρκετά και είδα πως λόγω του airflow του θέλει χαμηλότερο στήσιμο (ίσα που να μην ακουμπάνε οι αντιστάσεις κάτω). Επίσης, δοκίμασα τις έτοιμες αντιστάσεις του που είναι fused clapton και η γεύση είναι κομπλέ.
Τον προτείνω ανεπιφύλακτα αλλά παρέα με ένα fused clapton σύρμα για καλύτερη γεύση.
Very good RDA, as an owner of the dead rabbit RDA I would say that if you have the V2, it's not worth getting it. However, in general, it is excellent if you are coming from another one, especially if it's not a dripper.
πολυ καλος rda σαν κατοχως ολων τον dead rabbit RDA θα ελεγα οτι εαν εχετε τον V2 δεν αξιζει να τον παρετε. Γενικα ομως ειναι εξεριτκος εαν ερχεστε απο καποιον αλλον και ειδικα εαν δεν ειναι dripper.
This review is about the manufacturer colour: Gun Metal
Another unique product from Hellvape that doesn't disappoint me! Very smooth draw with satisfactory space for further dripping, with the ability to use squonk and a very nice and sturdy construction! The honeycomb style airflow is on point, just like the slot airflow! Beautiful design and ideal for drippers enthusiasts!
A M A Z I N G - G E T I T N O W !!!!
Ακόμα ένα μοναδικό προϊόν από Hellvape που δεν με απογοητεύει! Πολύ smooth τζούρα με ικανοποιητικό χώρο για περαιτέρω dripping με δυνατότητα χρήσης squonk και πολύ ωραία και στιβαρή κατασκευή! Το honeycomb style airflow μετράει φουλ όπως και το slot airflow! Πανέμορφο design και ιδανικό για λάτρεις drippers!
Α Ψ Ο Γ Ο - Α Γ Ο Ρ Α Μ Ε Κ Λ Ε Ι Σ Τ Α Μ Α Τ Ι Α !!!!
What can we say now,
With about 20 euros, no one can do the job.
Let others ask for 200 euros for an RDA....
Buy them with your eyes closed and don't waste your money....
P.S. if you like this kind of vaping, of course
Τι να λέμε τώρα ,
Με 20 ευρώ περίπου κανείς δουλειά .
Αφήστε τους άλλους να ζητάνε 200ευρα για έναν RDA ....
Με κλειστά τα μάτια αγοράστε των και μην πετάτε τα λεφτά σας ....
Υ.Γ αν σας αρέσει εννοείτε αυτού του είδους ατμισμα
I am a beginner in RDAs. I installed the coils and cotton, but the liquid was spitting upwards like crazy. Later, I learned that I had used too much cotton and filled the entire deck with it, when in fact the cotton should only touch the deck to avoid oversaturation and spitting, as shown in the coil building video I provided. I trimmed the excess cotton (without replacing it) and the situation improved significantly after a few puffs. The method below also helped me a lot with the common issue beginners face with rebuildable coils, as if the wick sits inactive at the beginning, it will still spit. The YouTube video mentions the same thing at the beginning. So, with the method below, it works perfectly. Lower wattages can also lead to boiling of the liquid instead of quick vaporization. With the coils I have, I set it to 24W. Rebuildable coils, dripping, and the wide 810 drip tip can lead to spitback, especially for beginners.
"Regarding over saturation, a pro tip I picked up from Reddit to help fix this issue if you’re experiencing this: if your device has an air flow adjuster, set it to full open and then activate the device and blow INTO it instead of drawing out the vapor. The vapor will disperse through the air flow and if you do this a few times it should help to clear out some of the oversaturated juice."
Experienced users know this, but even pre-built coils need a little adjustment of the legs when placing them on the posts with a screwdriver, otherwise they touch each other. The coils were labeled above 0.37Ω, so my device recognized them as parallel coils at around 0.19Ω (depending on the placement height). Finally, the part of the atomizer with the logo (the rabbit) has two notches on the inner side that allow for a 90-degree movement in relation to the deck, so that the airflow aligns parallel to the coils and doesn't get blocked by the cotton.
Coming from the Innokin Zlide, I have to say that I enjoy a better flavor. It is also difficult to burn the liquid if I increase the wattage a bit, as the cotton wicks a good amount of liquid. And with the Innokin, of course, if we stick to the recommended wattage by the coil manufacturer, we don't get a burnt taste.
I didn't even buy a dripping bottle, as I had a glass caramel bottle with a dropper from a store that sells herbal extracts, and I ran out of extract at some point. For transferring, I use a plastic pipette for DIY liquid
Είμαι αρχάριος σε RDAs. Πέρασα τις αντιστάσεις και το βαμβάκι και έφτυνε τρελά προς τα πάνω το υγρό. Μετά έμαθα ότι είχα βάλει πολύ βαμβάκι και είχα γεμίσει όλο το deck με αυτό, ενώ πρέπει ίσα-ίσα το βαμβάκι να ακουμπάει στο deck, αν έχουμε προβλήματα με υπερκορεσμό και φτύσιμο, όπως στο βίντεο coil building που παραθέτω. Έκοψα το περισσευούμενο το βαμβάκι (χωρίς να ξαναπεράσω καινούργιο) και βελτιώθηκε πάρα πολύ η κατάσταση μετά από αρκετές τζούρες. Ο παρακάτω τρόπος μου βελτίωσε επίσης πολύ το πρόβλημα μου, που είναι συχνό στους αρχάριους με rebuildable coils, καθώς αν κάτσει ανενεργό το φιτίλι στην αρχή πάλι φτύνει. Το βιντεάκι στο youtube αναφέρει το ίδιο στην αρχή. Έτσι με την παρακάτω μέθοδο έρχεται στα ίσια του. Και τα χαμηλά Watts μπορεί να οδηγήσουν σε βράσιμο του υγρού και όχι σε γρήγορη ατμοποίηση. Εγώ με τις αντιστάσεις που μου ήρθε το έχω στα 24W. Τα rebuildable coils, το dripping και το φαρδύ drip tip 810 μπορούν να οδηγήσουν σε spitback ειδικά σε αρχάριους.
"Regarding over saturation, a pro tip I picked up from Reddit to help fix this issue if you’re experiencing this: if your device has an air flow adjuster, set it to full open and then activate the device and blow INTO it instead of drawing out the vapour. The vapour will disperse through the air flow and if you do this a few times it should help to clear out some of the oversaturated juice"
https://www.youtube.com/watch?v=nKJ2TVroqAM
Οι έμπειροι το ξέρουν, αλλά οι αντιστάσεις ακόμα και αν είναι έτοιμες τυλιγμένες σε έλικα, προφανώς και θέλουν λίγο λύγισμα τα ποδαράκια κατά την τοποθέτηση στα posts με το κατσαβιδάκι, γιατί αλλιώς μου ακουμπούσαν η μία πάνω στην άλλη.
Οι αντιστάσεις γράφαν πάνω 0,37Ω, οπότε καλά μου αναγνώρισε η συσκευή μου την ισοδύναμη παράλληλη 2 αντιστάσεων στα 0,19Ω περίπου (ανάλογα και με το ύψος τοποθέτησης).
Τέλος, το τμήμα του ατμοποιητή με το λογότυπο (το κουνέλι) από την μέσα πλευρά έχει δύο δοντάκια που επιτρέπουν μια κίνηση 90 μοιρών περίπου σε σχέση με το deck, ώστε να φέρουμε τους αεραγωγούς παράλληλα με τις αντιστάσεις και να μην τους μπουκώνουν τα βαμβάκια.
Ερχόμενος από τον Innokin Zlide έχω να πω ότι απολαμβάνω καλύτερο άρωμα. Επίσης είναι δύσκολο να κάψω το υγρό αν ανεβάσω κάπως τα Watts, καθώς τα φιτίλια με βαμβάκι ρουφάνε αρκετή ποσότητα υγρού. Και στον Innokin βέβαια αν μείνουμε στα Watts που προτείνει ο κατασκευαστής των αντιστάσεων δεν έχουμε καμμένη γεύση.
Μπουκαλάκι για το dripping δεν αγόρασα καν καθώς είχα ένα γυάλινο καραμελέ με σταγονόμετρο από καταστήματα που πουλάνε βάμματα βοτάνων και μου τέλειωσε το βάμμα κάποτε. Για μετάγγιση χρησιμοποιώ μια πλαστική πιπέτα σε DIY υγρό.
https://www.skroutz.gr/s/30592796/%CE%A0%CE%B9%CF%80%CE%AD%CF%84%CE%B1-%CE%A0%CE%BB%CE%B1%CF%83%CF%84%CE%B9%CE%BA%CE%AE-%CE%91%CF%80%CE%BF%CF%83%CF%84%CE%B5%CE%B9%CF%81%CF%89%CE%BC%CE%AD%CE%BD%CE%B7-1ml-001482.html?from=catspan
My first RDA and I can say that I am very satisfied. It is very easy to set up and has 2 airflow options (open and honeycomb).
The only problem I had was the "muted" flavor and maybe my setup played a role. The simple Kanthal wire did not give me a strong flavor, as well as the placement I did by putting the coils relatively high. I did some research and found that due to its airflow, it requires a lower setup (just enough for the coils not to touch the bottom). Also, I tried the pre-made fused clapton coils and the flavor is great.
I highly recommend it, but along with a fused clapton wire for better flavor.
Ο πρώτος μου RDA και μπορώ να πω ότι είμαι πολύ ευχαριστημένη. Είναι πολύ εύκολος στο στήσιμο και έχει 2 επιλογές airflow (ανοιχτό και honeycomb).
Το μόνο πρόβλημα που είχα ήταν το "muted" flavor και ίσως έπαιζε ρόλο το στήσιμό μου. Το απλό Kanthal σύρμα δεν μου έβγαλε δυνατή γεύση, όπως επίσης η τοποθέτηση που έκανα καθώς έβαλα τις αντιστάσεις σχετικά ψηλά. Έψαξα αρκετά και είδα πως λόγω του airflow του θέλει χαμηλότερο στήσιμο (ίσα που να μην ακουμπάνε οι αντιστάσεις κάτω). Επίσης, δοκίμασα τις έτοιμες αντιστάσεις του που είναι fused clapton και η γεύση είναι κομπλέ.
Τον προτείνω ανεπιφύλακτα αλλά παρέα με ένα fused clapton σύρμα για καλύτερη γεύση.