Transparent, anti-slip 2-component varnish for indoor and outdoor use with strong adhesion, high resistance to abrasion and chemical agents. Provides excellent sealing and protection to all types of structural elements. Creates an anti-slip surface, even when wet. 

Its special composition contains ultraviolet radiation filters against ultraviolet radiation, providing protection to shades and styles due to the fact that it does not become yellowish or discolored over time.

Application fields:
Suitable for creating an anti-slip surface even when wet, seals and protects all types of structural elements
Recommended for microcircuit systems, cementitious substrates, wood, metal, natural stone, for surfaces with standing water, showers, pools, tiles, stairs, balconies, corridors, loading ramps, etc.

Characteristics:

• Creates an anti-slip surface
• Suitable for indoor and outdoor applications
• Water and neutral cleaner resistance
• Ultraviolet radiation resistance
• Shines and protects
• Does not peel off
• Easy and quick application
• High adhesion to the substrate
• Economical solution for a perfect result
• Very low consumption

Instructions for use:

• The surface must be clean, dry, and free from dust and mold before application.
• Mix the hardener (component B) with all the resin (component A). For better mixing, it is recommended to use an electric mixer at low speed for 2-3 minutes. The mixing should be done carefully from bottom to top and from the walls of the container. Allow the mixture to settle for a few minutes before use.
• For application, use a roller in 1-2 layers. For better protection, a second layer should be applied within 24 hours, depending on the application temperature conditions.
• Dries within 5-6 hours, so it does not stick.
• Drying times refer to normal environmental conditions (25ºC, 60% humidity). Each subsequent layer should be applied within 24 hours of the previous one. Any differences in temperature and humidity can change the above times.