It is easily installed and quickly on the kitchen sink and completely replaces the classic faucet. It is easy to use or maintain and serves daily needs such as washing hands or dishes.
Installation
It is easily installed and quickly on the kitchen sink and completely replaces the classic faucet. It is easy to use or maintain and serves daily needs such as washing hands or dishes.
Digital Display
It is equipped with a built-in digital display that shows you the water temperature and also allows you to select it yourself.
Additionally, it features a flexible spout so you can reach every corner of the sink and clean utensils with ease.
Features:
- Hot water in seconds
- Maximum water temperature 60°C
- Inox body
- Water outlet pipe that rotates 360°
- Flexible spiral spout
- IPX4 certification
- No need for central heating or water heater
- Fully replaces the faucet
- Countertop type (connection to the water network from the bottom)
- Operating pressure: 0.04 – 0.6 MPa (0.4 – 6 bar)
- You have as much hot water as you need
- Water temperature adjustment
- No water or energy loss
- Beautiful design for the kitchen, bathroom, cottage
- Easy and quick assembly and installation
- Water temperature display screen
- Power: 3300W
What is an instant water heater?
The instant water heater is a type of water heater that heats water in real-time. It only heats the water that passes through it at that moment. There is no hot water storage tank. This has many advantages, such as energy savings, since only the water that is used is heated, and longer lifespan, as there is no water tank and no accumulation of salts on the resistance and other components.
It operates with electricity and is single-phase.
How It Works
The instant water heater has a cold water inlet pipe, which passes through the heating element, gets heated, and exits through the hot water outlet pipe. A necessary condition for the instant water heater to initially operate is the pressure of the incoming cold water should not be too low.
The water temperature is regulated by a thermostat, so it does not exceed a maximum value. The temperatures that the hot water reaches are pre-set so that one can use the hot water directly, without needing to mix it with cold water.
The maximum temperature it can reach for hot water production is 60 °C, while the maximum water flow rate reaches up to 3 liters per minute. Indicatively, 38-42 °C degrees are standard for shower use.
Advantages of an instant water heater compared to a classic electric water heater
- It is small in size and doesn't take up much space.
- There are no energy losses, as only the water being used is heated at that moment. Therefore, we save on the electricity bill. In a traditional water heater, the hot water that is not used is wasted.
- The hot water used in the instant water heater is used as is, without mixing with cold, as happens in a traditional water heater. Thus, we save water as well as electricity.
- There is no need to wait for the water to heat up. As soon as we turn on the tap, hot water runs in a few seconds. A traditional water heater takes a few minutes, depending on its size.
- The hot water never runs out. As long as we have the tap open, we will have hot water.
- Product Number
- OHF-2035
Product Details
- Power Source
- Electric Single Phase
- Maximum Power
- 3.3 kW
- Maximum Flow Rate
- 3 lt/min
- Maximum Temperature
- 60 °C
- Temperature Setting
- Heating Levels
- Placement
- Kitchen
- Wall Mounted
- No
- Inverter
- No
- Remote Control
- No
Dimensions
- Height
- -
- Width
- 24.5 cm
- Length
- -
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.