Type: Water satin varnish (gel)

Application method: Brush, roller or airless spray gun.

Application quantity: 80-140 g/m².

Thinning: If necessary 5-10% deionized water

Coverage: Approximately 8-10 m² per liter on properly prepared surfaces.

Drying: Dries in 1 hour. Can be repainted in 3 hours. Drying varies in cold humid weather conditions.

Storage: Storage is recommended at temperatures from 5°C to 35°C.

VOC (Volatile Organic Compounds): Cat. A/d type Y (Interior use for wood finishes and veneers) limit value 130 g/l. The product contains 30 g/l ready for use.

The product is ready for use. It can be thinned with water, preferably deionized, up to 10% for spray gun application and up to a maximum of 5% with brush. Surfaces should be clean, dry and free from loose peeling paint, dust, oils, salts, and fungi. On surfaces with poor quality paints, sand with sandpaper.