Application of VELVET ACRYL

To ensure proper adhesion of the product, the surface to be painted must be cleaned of dust, grease, oils, peeling old paints, rust, and any mold or moisture residues.

For new or porous surfaces, first apply the corresponding recommended primer of the product.

After thoroughly mixing the product, apply it in 2 coats, which should be spaced 1 - 2 hours apart. The product achieves all its mechanical strengths after 20 - 30 days.

Dilution

• First coat: 15% water.
• Second coat: 5-10% water.

Application Conditions for VELVET ACRYL

Avoid applying the product at temperatures below 6°C and above 40°C and when the relative humidity is above 80%. Adverse conditions during application can alter the final properties of the paint.

Application Tools

• Brush
• Roller
• Paint sprayer

During work, keep the tools “wet” inside the container or in the product's container. Squeeze out excess product back into the box and immediately clean with warm water and soap. If the product dries, it can only be removed with strong detergents. Do not dispose of wash liquids into the groundwater.