Skroutz.gr

GloboStar LED Strip 5V RGB Light 2m Type SMD5050
LED Strips

GloboStar LED Strip 5V RGB Light 2m Type SMD5050 Code: 90606

The GloboStar 90606 LED strip uses addressable RGB pixels and the SPI/TTL communication protocol for digital lighting projects. The 20 pixels per metre are controlled by WS2812 / SK6812 chips.

The...

The GloboStar 90606 LED strip uses addressable RGB pixels and the SPI/TTL communication protocol for digital lighting projects. The 20 pixels per metre are controlled by WS2812 / SK6812 chips.

The flexible strip has a double-layer printed circuit board (PCB) with 3 oz copper plating. It is a component and does not operate independently; a 5 V DC power supply...

See full description See full description

Top specs

See all

  • Power Supply

    The power supply concerns the voltage of the current that the LED strip must have.

    2. If the LED strip does not include a power supply, then the power supply must be purchased separately. We must ensure that the power supply has the corresponding voltage (volt) in order to connect it to the outlet.

    5V

    The LED film is powered by electricity through a USB connected to a corresponding device, such as a computer screen or television.

  • Protection certification

    "It is an indicator that shows us the degree of protection of each LED. The indicator (I), which is the first number, refers to protection against dust, and the indicator (P), which is the second number, refers to protection against water. The higher the numbers for each indicator, the better the protection."

    IP20

    LED films with an IP20 rating are mainly recommended for concealed office lighting, as they have little protection against dust and no protection against water.

  • Light Shade

    RGB

    The led film can take various shades by combining the colors, red, green and blue.
  • Connectivity IR
17 60 €
You earn a 10,00 € coupon
for your next purchase

Deals & Benefits

Κέρδισε 10€ κουπόνι με Mastercard

Τα Mastercard Wednesdays είναι εδώ. Κάνε σήμερα μία παραγγελία αξίας από 100€ έως και 200€ με κάρτα Mastercard* και κέρδισε 10€ κουπόνι για την επόμενη παραγγελία σου άνω των 100€!

Μην ξεχνάς, μπορείς να κερδίσεις έως 2 κουπόνια συνολικής αξίας 30€!

Η προσφορά ισχύει μέχρι τα μεσάνυχτα γι' αυτό βιάσου.

*Εξαιρούνται παραγγελίες μέσω Revolut Pay & Klarna

Terms & conditions apply
You earn a 20,00 € coupon
for your next purchase

Deals & Benefits

Κέρδισε 20€ κουπόνι με Mastercard

Τα Mastercard Wednesdays είναι εδώ. Κάνε σήμερα μία παραγγελία άνω των 200€ με κάρτα Mastercard* και κέρδισε 20€ κουπόνι για την επόμενη παραγγελία σου άνω των 150€!

Μην ξεχνάς, μπορείς να κερδίσεις έως 2 κουπόνια συνολικής αξίας 30€!

Η προσφορά ισχύει μέχρι τα μεσάνυχτα γι' αυτό βιάσου.

*Εξαιρούνται παραγγελίες μέσω Revolut Pay & Klarna

Terms & conditions apply
You earn a 15,00 € coupon
for your next purchase

Deals & Benefits

Κέρδισε 15€ κουπόνι με Mastercard

Τα Mastercard Wednesdays είναι εδώ. Κάνε σήμερα μία παραγγελία αξίας από 100€ έως και 200€ με κάρτα Mastercard* και κέρδισε 15€ κουπόνι για την επόμενη παραγγελία σου άνω των 100€!

Μην ξεχνάς, μπορείς να κερδίσεις έως 2 κουπόνια συνολικής αξίας 40€!

Η προσφορά ισχύει μέχρι τα μεσάνυχτα γι' αυτό βιάσου.

*Εξαιρούνται παραγγελίες μέσω Revolut Pay & Klarna

Terms & conditions apply
You earn a 25,00 € coupon
for your next purchase

Deals & Benefits

Κέρδισε 25€ κουπόνι με Mastercard

Τα Mastercard Wednesdays είναι εδώ. Κάνε σήμερα μία παραγγελία άνω των 200€ με κάρτα Mastercard* και κέρδισε 25€ κουπόνι για την επόμενη παραγγελία σου άνω των 150€!

Μην ξεχνάς, μπορείς να κερδίσεις έως 2 κουπόνια συνολικής αξίας 40€!

Η προσφορά ισχύει μέχρι τα μεσάνυχτα γι' αυτό βιάσου.

*Εξαιρούνται παραγγελίες μέσω Revolut Pay & Klarna

Terms & conditions apply
Delivery by Fri, 06 Nov
2,50 € to a Skroutz Point
or   3,50 €   shipping cost
Do you want it with Free shipping to Skroutz Point?
From Shopless 4.9 (13)
4.9 (13 reviews)
Αθήνα, Αττικής
20+ pieces
See LED Strips & Accessories on the page of Shopless

Shop selection criteria

Why do we recommend buying from this shop?

We don’t only look at the price. We weigh different factors to find an offer that combines a good price, fast delivery and a reliable purchase.

  • Product price

    We calculate the total price you will pay and any discounts available from the shop.

  • Shipping & delivery time

    We check how quickly the product can be shipped and when you will receive it, based on your address.

  • Shop reliability

    We look at how often shops complete their orders successfully and how consistently they serve their customers.

  • Official reseller

    Where available, we take into account whether the shop is an official reseller of the brand.
What if it breaks?

You're covered by the statutory 2-year warranty. Contact us and we'll handle the entire process with the store, ensuring your issue is resolved with prompt support through a repair, replacement, or refund.

What if I change my mind?

No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.

  • Light fixture installation

    • Wall mounting
    • Assembly

    The services are only available in Attica

You can select additional services after adding the product to the cart.

Reviews (3)

Reviews

3.0
3
3.0
Review this product
  1. 1
  2. 4 stars
    0
  3. 1
  4. 2 stars
    0
  5. 1
Review this product
  • Lighting
  • Material quality
  • Longevity
  • Value for money
  • Installation
  • Adhesive quality
  • Giannis'D
    5
    3 out of 3 members found this review helpful
    Giannis'D

    It is worth the money in my case because I will use it in 2-3 separate points with individual controllers. The controller is an esp8266 (around 8 euros) with wled, it works very well. The main reason for purchasing this strip was for the custom effects that wled offers, as well as the wifi and support for home assistant.

    I have installed 160 centimeters of it in my office with a 5V 3A power supply.

    Edit: It is difficult to attach thick cables in my case, as I am using 2x1.5 cables. This is because to use it at full brightness, it requires more amperage. I would recommend going for 12V so that you don't need such thick cables

    Translated from Greek ·
    • Lighting
    • Material quality
    • Longevity
    • Adhesive quality
    • Installation
    • Value for money
    Did you find this review helpful?
  • 3
    peter antoniou

    Verified purchase

    • Lighting
    • Value for money
    • Material quality
    • Installation
    • Adhesive quality
  • 1
    Christos_Papageorgiou54

    Verified purchase

    • Lighting
    • Installation
    • Longevity
    • Value for money
    • Adhesive quality
  • Giannis'D
    5
    Giannis'D

    It is worth the money in my case because I will use it in 2-3 separate points with individual controllers. The controller is an esp8266 (around 8 euros) with wled, it works very well. The main reason for purchasing this strip was for the custom effects that wled offers, as well as the wifi and support for home assistant.

    I have installed 160 centimeters of it in my office with a 5V 3A power supply.

    Edit: It is difficult to attach thick cables in my case, as I am using 2x1.5 cables. This is because to use it at full brightness, it requires more amperage. I would recommend going for 12V so that you don't need such thick cables

    Translated from Greek ·
    3
  • 3
    peter antoniou

    0
  • 1
    Christos_Papageorgiou54

    0
  • See all
Questions
Product report

Description & Specifications

The GloboStar 90606 LED strip uses addressable RGB pixels and the SPI/TTL communication protocol for digital lighting projects. The 20 pixels per metre are controlled by WS2812 / SK6812 chips.

The flexible strip has a double-layer printed circuit board (PCB) with 3 oz copper plating. It is a component and does not operate independently; a 5 V DC power supply and the necessary accessories are required.

  • LED type: EPISTAR SMD 5050
  • LED density: 60 LED/m
  • Pixel density: 20 pixels/m
  • Light colour: RGB
  • Addressable: Yes
  • Communication protocol: SPI/TTL
  • Driver chip: WS2812 / SK6812
  • Power supply: 5 V DC
  • Power: 14.4 W/m
  • Luminous flux: 1152 lm/m
  • Luminous efficacy: 80 lm/W
  • Colour rendering index: > 80
  • Beam angle: 120°
  • Dimmable: Yes
  • Length: 2 m
  • Dimensions: 2 m × 12 mm × 2 mm
  • Circuit material: Double-layer printed circuit board (PCB) with 3 oz copper plating
  • Body colour: White
  • Ingress protection rating: IP20
  • Operating temperature: -10 to +50 °C
  • Energy class: G
  • Lifespan: 30000 h
  • On/off switching cycles: 50000
  • Colour consistency: ≤ 6 SDCM
  • Luminous flux maintenance factor: 0.90
  • Displacement factor: 0.85
  • Flicker measurement: 0.02 Pst LM
  • Stroboscopic effect measurement: 0.001 SVM
  • Certifications and standards: CE, EMC Directive 2014/30/EU, LVD Directive 2014/35/EU, RoHS 2 Directive 2011/65/EU-(EU)2015/863-(EU)2017/2102

Manufacturer

Manufacturer Details

Warnings & Safety Information
Product Number
90606

Dimensions

Length
2 m
Power Source
5V

Power Source

The power supply concerns the voltage of the current that the LED strip must have.

2. If the LED strip does not include a power supply, then the power supply must be purchased separately. We must ensure that the power supply has the corresponding voltage (volt) in order to connect it to the outlet.

5V

The LED film is powered by electricity through a USB connected to a corresponding device, such as a computer screen or television.
Light Colour
RGB

Light Colour

RGB
The led film can take various shades by combining the colors, red, green and blue.
Protection Certification
IP20

Protection Certification

"It is an indicator that shows us the degree of protection of each LED. The indicator (I), which is the first number, refers to protection against dust, and the indicator (P), which is the second number, refers to protection against water. The higher the numbers for each indicator, the better the protection."

IP20
LED films with an IP20 rating are mainly recommended for concealed office lighting, as they have little protection against dust and no protection against water.
USB
No

Additional Features

LED type
SMD5050

LED type

This concerns the dimensions of the LEDs on the strip. For example, an SMD 3528 strip has LEDs with a width of 3.5mm and a length of 2.8mm.

SMD5050
The 5050 LED is brighter than the 3528 and suitable for large surfaces and spaces with ambient light. Additionally, they are better for applications with colors (RGB).
LED Density
60 LED/m

LED Density

"It is an indicator that shows how many LED lights are present in 1 meter. The more LED lights there are, the stronger the brightness."
Power
14.4 W/m

Power

Power is measured in watts per meter and indicates the amount of electrical energy consumed for each meter of the LED strip.
2. The power values are usually quite small and therefore the cost of electricity consumption is considered negligible.
Connectivity
IR
TV
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (3)

3.0
3
3.0
Review this product
  1. 1
  2. 4 stars
    0
  3. 1
  4. 2 stars
    0
  5. 1
Review this product
  • Lighting
  • Material quality
  • Longevity
  • Value for money
  • Installation
  • Adhesive quality
  • Giannis'D
    5
    3 out of 3 members found this review helpful
    Giannis'D

    It is worth the money in my case because I will use it in 2-3 separate points with individual controllers. The controller is an esp8266 (around 8 euros) with wled, it works very well. The main reason for purchasing this strip was for the custom effects that wled offers, as well as the wifi and support for home assistant.

    I have installed 160 centimeters of it in my office with a 5V 3A power supply.

    Edit: It is difficult to attach thick cables in my case, as I am using 2x1.5 cables. This is because to use it at full brightness, it requires more amperage. I would recommend going for 12V so that you don't need such thick cables

    Translated from Greek ·
    • Lighting
    • Material quality
    • Longevity
    • Adhesive quality
    • Installation
    • Value for money
    Did you find this review helpful?
  • 3
    peter antoniou

    Verified purchase

    • Lighting
    • Value for money
    • Material quality
    • Installation
    • Adhesive quality
  • 1
    Christos_Papageorgiou54

    Verified purchase

    • Lighting
    • Installation
    • Longevity
    • Value for money
    • Adhesive quality
  • Giannis'D
    5
    Giannis'D

    It is worth the money in my case because I will use it in 2-3 separate points with individual controllers. The controller is an esp8266 (around 8 euros) with wled, it works very well. The main reason for purchasing this strip was for the custom effects that wled offers, as well as the wifi and support for home assistant.

    I have installed 160 centimeters of it in my office with a 5V 3A power supply.

    Edit: It is difficult to attach thick cables in my case, as I am using 2x1.5 cables. This is because to use it at full brightness, it requires more amperage. I would recommend going for 12V so that you don't need such thick cables

    Translated from Greek ·
    3
  • 3
    peter antoniou

    0
  • 1
    Christos_Papageorgiou54

    0
  • See all
17,60 €
2,50 € to a Skroutz Point
or   3,50 €   shipping cost