The Blackmagic Design Studio Camera 4K Pro G2 records Ultra HD video at up to 60 fps and features a Four Thirds sensor with 13 stops of dynamic range. Its 7-inch LCD touchscreen has a resolution of 1920 x 1200 pixels and a brightness of 2000 nits. The 12G-SDI and 10G Ethernet connections support use with SDI switchers and the transmission of multiple signals over a single cable.

The 12G-SDI output and 12G-SDI program return input carry video and enable camera control, talkback and tally. The camera also features an HDMI output with control capabilities, a built-in stereo microphone and a mono speaker. Recording in Blackmagic RAW is supported on external storage media via the USB-C ports.

• Sensor: Four Thirds CMOS, 17.78 x 10 mm
• Video resolution: 3840 x 2160 pixels
• Maximum frame rate: 60 fps
• Dynamic range: 13 stops
• ISO sensitivity: Dual native ISO, with gain at 0 dB and 18 dB
• Signal-to-noise ratio: 63 dB for 2160p
• Focus: Automatic with compatible lenses
• Lens control: Iris, focus and zoom with compatible lenses
• Lens mount: Active MFT
• Display: 7-inch LCD touchscreen, 1920 x 1200 pixels, 2000 nits
• Video connections: 1 SDI input, 1 SDI output and 1 HDMI 2.0 output
• SDI rates: 1.5G, 3G, 6G, 12G
• Audio connections: 2 XLR inputs with switchable mic or line level and phantom power support, 3.5 mm stereo input, 5-pin XLR output for talkback headsets and 3.5 mm TRRS jack for headsets with a microphone
• SDI audio: 2 program audio channels and 2 talkback channels on channels 15 and 16
• Microphone: Built-in stereo
• Speaker: Built-in mono
• USB-C ports: 2 USB-C 3.1 Gen 1 ports, up to 5 Gb/s, for external media and connection of focus or zoom demands
• Recording format: Blackmagic RAW 3:1, 5:1, 8:1, 12:1, Q0, Q1, Q3 and Q5
• Supported recording resolutions: 6K (6144 x 3456), 6K 2.4:1 (6144 x 2560), 5.3K 16:9 (5376 x 3024) and Ultra HD (3840 x 2160)
• Supported file systems: ExFAT and HFS+
• Reference inputs: Tri-Sync or Black Burst with optional Blackmagic Studio Converter
• Power: External 12 V DC, 60 W power supply; 12 V DC input with a 5.5 mm locking connector; 4-pin XLR 12 V DC input; and Ethernet power via Type 4 PoE power supplies
• Tripod mount: 2 x 1/4-inch and 1 x 3/8-inch sockets
• Width: 273.6 mm
• Height: 169.7 mm
• Length: 167.3 mm
• Weight: 1685 g
• Package contents: Screen sunshade, tripod mount compatible with lightweight 15 mm rails, turret dust cap and external 12 V DC power supply with locking connector and plug adapters