Skroutz.gr

Grundfos SQE 3-65 System Single-phase Pump Drilling 1.6hp 96524501
Submersible Water Pumps

Grundfos SQE 3-65 System Single-phase Pump Drilling 1.6hp 96524501

The SQE series pumps are designed for pumping thin, clean, non-corrosive liquids that do not contain solid particles or fibers. They are suitable for continuous and intermittent operation in a variety...

The SQE series pumps are designed for pumping thin, clean, non-corrosive liquids that do not contain solid particles or fibers. They are suitable for continuous and intermittent operation in a variety of applications such as domestic water supply, small hydroponic installations, irrigation, or as a pressure group.

  • Pump: 3" SQE 3-65
  • Nominal Power P2: 1.15 Kw...
See full description See full description

Top specs

  • Horsepower

    Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).

  • Voltage

    Single-Phase

    Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 

  • Power

    It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

  • Manometric Height

    92

    The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

    • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
    • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
  • See all
2660 00 €
2,66€ cashback in Coins 2,66€ cashback in Coins
Delivery up to 12 days
31,50 €  

Reduced Shipping

For purchases from Skroutz a discount is applied for this particular product.

Learn more
Delivery to your floor available
Do you want it with Free shipping?
From Lamas
Ηράκλειο Κρήτης, Ηρακλείου
2 pieces
See Water Pumps on the page of Lamas
What if it breaks?

You're covered by the statutory 2-year warranty. Contact us and we'll handle the entire process with the store, ensuring your issue is resolved with prompt support through a repair, replacement, or refund.

What if I change my mind?

No problem, as long as it's within 14 days. We'll come and pick it up (completely free of charge if you have Skroutz Plus) and refund your money.

Product report

Description

Description

The SQE series pumps are designed for pumping thin, clean, non-corrosive liquids that do not contain solid particles or fibers. They are suitable for continuous and intermittent operation in a variety of applications such as domestic water supply, small hydroponic installations, irrigation, or as a pressure group.

  • Pump: 3" SQE 3-65
  • Nominal Power P2: 1.15 Kw / 1.6 Hp
  • Voltage: 200-240V - 50/60 Hz
  • Installation Depth (Max): 150m
  • Maximum Manometric Height: 92m
  • Maximum Flow Rate: 4.9 m3/h
  • Liquid Temperature: +20C to +350C
  • Construction Material: Stainless Steel AISI 304

CU 301 Control Unit:

  • Complete control of the pumps
  • Bidirectional communication with the SQE pumps
  • Ability to adjust the pressure
  • LED alarm indication when service is required
  • Ability to start, pause, and reset the pump
  • Communication with the Grundfos Go remote control
  • The CU 301 controller communicates with the pump via the power cable (no additional cables are required between them)

Video

Specifications

  • Motor: 1.15 kW, single-phase 230 V, model SQE 3‑65
  • Nominal flow rate ~66 l/min (~4 m³/h)
  • Maximum vertical height ~90 m (6.5 bar)
  • Cable: 40 m for boreholes 3 to 4″, allows full submersion
  • Construction: Stainless steel hydraulics and magnetic motor – resistant to wear & corrosion
  • Compact diameter 76 mm – suitable for narrow boreholes


Stable Pressure & Control

  • Built-in inverter / CU301 converter with pressure sensor – maintains constant pressure (adjustable 2–4 bar)
  • Small pressure tank (~8 lt) – smaller and more efficient system than traditional solutions
  • Protections: anti-dry run, overheating protection, over/under voltage and soft‑start

Benefits & Applications

  • Stable and uninterrupted water pressure for taps, showers, irrigation
  • Energy savings through adjustable operating speed
  • Minimal maintenance required thanks to reliable control & protective functions
  • Flexible design for 3–4″ boreholes, with flow/head options in other SQE models

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
Drilling

Type

Drilling
Drilling pumps are used for pumping water or other liquids from underground boreholes (water sources) to surfaces for various purposes, such as water supply, irrigation, industrial applications
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Horsepower
1.6 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
1200 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
No

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
92 m

Maximum Head Height: 92


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Maximum Output
4.9 m³/h

Maximum Output

The maximum output or flow of a submersible water pump, as defined by the manufacturers, is the maximum amount of water the pump can move under ideal conditions, usually with zero head (i.e., no lift resistance).
Pump Submersion Depth
150 m
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
Yes

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (1)

Reviews

5.0
1
5.0
Review this product
  1. 1
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
Questions

Questions

Do you have a question about the product?

1 user has this product and can help you

Ask for the product

Description & Specifications

The SQE series pumps are designed for pumping thin, clean, non-corrosive liquids that do not contain solid particles or fibers. They are suitable for continuous and intermittent operation in a variety of applications such as domestic water supply, small hydroponic installations, irrigation, or as a pressure group.

  • Pump: 3" SQE 3-65
  • Nominal Power P2: 1.15 Kw / 1.6 Hp
  • Voltage: 200-240V - 50/60 Hz
  • Installation Depth (Max): 150m
  • Maximum Manometric Height: 92m
  • Maximum Flow Rate: 4.9 m3/h
  • Liquid Temperature: +20C to +350C
  • Construction Material: Stainless Steel AISI 304

CU 301 Control Unit:

  • Complete control of the pumps
  • Bidirectional communication with the SQE pumps
  • Ability to adjust the pressure
  • LED alarm indication when service is required
  • Ability to start, pause, and reset the pump
  • Communication with the Grundfos Go remote control
  • The CU 301 controller communicates with the pump via the power cable (no additional cables are required between them)

Video

Specifications

  • Motor: 1.15 kW, single-phase 230 V, model SQE 3‑65
  • Nominal flow rate ~66 l/min (~4 m³/h)
  • Maximum vertical height ~90 m (6.5 bar)
  • Cable: 40 m for boreholes 3 to 4″, allows full submersion
  • Construction: Stainless steel hydraulics and magnetic motor – resistant to wear & corrosion
  • Compact diameter 76 mm – suitable for narrow boreholes


Stable Pressure & Control

  • Built-in inverter / CU301 converter with pressure sensor – maintains constant pressure (adjustable 2–4 bar)
  • Small pressure tank (~8 lt) – smaller and more efficient system than traditional solutions
  • Protections: anti-dry run, overheating protection, over/under voltage and soft‑start

Benefits & Applications

  • Stable and uninterrupted water pressure for taps, showers, irrigation
  • Energy savings through adjustable operating speed
  • Minimal maintenance required thanks to reliable control & protective functions
  • Flexible design for 3–4″ boreholes, with flow/head options in other SQE models

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
Drilling

Type

Drilling
Drilling pumps are used for pumping water or other liquids from underground boreholes (water sources) to surfaces for various purposes, such as water supply, irrigation, industrial applications
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Horsepower
1.6 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
1200 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
No

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
92 m

Maximum Head Height: 92


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Maximum Output
4.9 m³/h

Maximum Output

The maximum output or flow of a submersible water pump, as defined by the manufacturers, is the maximum amount of water the pump can move under ideal conditions, usually with zero head (i.e., no lift resistance).
Pump Submersion Depth
150 m
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
Yes

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (1)

5.0
1
5.0
Review this product
  1. 1
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
2.660,00 €
31,50 €  

Reduced Shipping

For purchases from Skroutz a discount is applied for this particular product.

Learn more
Delivery to your floor available