Wood Stoves

Prity FG W18 R Metallic Wood Stove Radiator with Oven 21.4kW Beige

Wood boiler stove with radiator connection and legs. It features a cast iron cooking surface, wooden door handles, ash drawer, wood storage space, and a manual damper for air supply control.

See full description
765 00
765 Coins 765 Coins
Delivery up to 10 days
22,00 €  
Delivery to your floor available
Do you want it with 7,00 € shipping?
From Hlektrika 3.8 (56)
Θεσσαλονίκη, Θεσσαλονίκης
See Heating & Air Conditioning on the page of Hlektrika
What if it breaks?

You're covered by the statutory 2-year warranty. Contact us and we'll handle the entire process with the store, ensuring your issue is resolved with prompt support through a repair, replacement, or refund.

What if I change my mind?

No problem, as long as it's within 14 days. We'll come and pick it up (completely free of charge if you have Skroutz Plus) and refund your money.

Is delivery to a floor free?

Yes, we will carry it up to the floor for you, without any restrictions.

Description

Description

  • Built-in hot water jacket for connection to central heating system.
  • Combustion chamber with door with heat-resistant ceramic glass.
  • Combustion chamber with firebricks for heat reflection and cast iron grate.


Warning!

  • Do not start when it is not connected to radiators or fan coils. Burning wood in the stove/fireplace/boiler without water in the system will damage the jacket and cause leaks.
  • Achieving the desired heat output depends on:
    • the selected fuel with the required thermal power and moisture
    • regular refueling of combustible material
    • the adjustment of primary and secondary air
    • the adjustment of draft
    • the effective heat exchange of the fireplace with the environment, etc.
  • In any installation where copper is present, the hydraulic fireplace/stove/boiler should be protected from the phenomenon of electrolysis by installing a magnesium anode or a corresponding system
  • Wood stove with oven and boiler for connection to a home radiator circuit
  • Suitable for spaces: 130m² or 390m³
  • Thermal Power (boiler + stove): 18+5=23kW
  • Nominal boiler power: 15kW
  • Efficiency: 83%
  • Construction Material: Steel (5mm in the combustion chamber & 2.5mm around)
  • Insulating Material: Firebricks
  • Fuels: Wood, briquettes
  • Air supply regulator
  • Exhaust control regulator
  • Ash collection drawer
  • Fireproof glass with ventilation to keep it always clean
  • Water tank capacity: 15lt
  • Maximum water temperature: 90°C
  • Maximum operating pressure of the water circuit: 1bar
  • Factory test operating pressure: 1.8bar
  • Water connection diameter: ∅ 1"
  • Flue gas temperature: 190°C
  • Amount of emitted flue gases: 13gr/sec
  • Ash content: 38mg/m³
  • CO concentration in flue gases: 575mg/m³
  • CO emissions: 0.046%
  • Flue gas pressure (min): 12+/-2 Pa
  • Chimney diameter: ∅13cm
  • Door dimensions: 30 x 20cm
  • Combustion chamber dimensions (HxWxD): 43 x 46.5 x 27cm
  • Oven dimensions (HxWxD): 19 x 39.5 x 41.3cm
  • Dimensions (HxWxD): 105 x 57 x 53cm
  • Weight: 150kg
  • Additional equipment required for connection to the radiator, not included in the package
  • (circulator, supply collector, return collector, open expansion tank,
  • constant temperature valve, safety valve, check valve, air vent tank,
  • optionally you can use a three-way valve)

Manufacturer

See full description

Specifications

Specifications

Product Details

Air Ηeater
No
Radiator
Yes
Cook Stove (with Oven)
Yes
Chimney diameter
130 mm
Material
Metallic
Colour
Beige
Weight
150 kg
Wood Heating Stove
No

Performance

Energy Class
A
Total Power
21.4 kW
Power in Air
5.4 kW
Power in Water
16 kW
Energy Efficiency
76.4 %
Water Consumption
9.337 kg/h

Dimensions

Height
1050 mm
Width
570 mm
Length
530 mm

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (5)

Reviews

  1. 3
  2. 2
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • Heating performance
  • Combustion space size
  • Value for money
  • Draft
  • Construction quality
  • Wood consumption
  • tsoler7196
    5
    13 out of 14 members found this review helpful

    In a two-story house of 120 sqm and without perfect insulation, you can walk around with short sleeves. It heats up 6-7 bodies, it also heats up an extra water boiler that was installed and at the same time you can bake your pizzas, bread or any food in the oven it has.
    Consumption is about 10 tons/year.

    Tips

    The woods that should be used are mainly oak because the stove needs a flame + a little bit of ash to keep the charcoal overnight (duration).
    Definitely dry and seasoned woods, otherwise the chimney, the flue, and the stove will need cleaning quickly.
    Typically, it needs cleaning every month for sure.
    It doesn't smoke if you learn to operate it correctly over time.
    It needs a three-way valve before the circuit inlet to keep it in good condition for years without any damage. Every time we light the stove, this valve gradually introduces the (cold) water from the circuit into its tank (hot)... so it helps to prevent damage from sudden cold entry into a hot tank (contractions, expansions of metal sheets, etc.). Hydraulic installers are aware of these things.

    It is also good to have a UPS because if the power goes out, the stove raises high temperatures.
    CAUTION - THE HYDRAULIC STOVE IS MADE TO WORK IN A CIRCUIT WITH BODIES.

    Translated from Greek ·
    • Heating performance
    • Draft
    • Combustion space size
    • Value for money
    Did you find this review helpful?
  • Dimitris_karres
    4
    5 out of 5 members found this review helpful

    I have it for 3 years, it's an amazing stove, it's worth its money. It needs a conversion to a bigger size if possible, bigger. It dries wood and 120 square meters become heaven

    Translated from Greek ·
    • Heating performance
    • Combustion space size
    • Value for money
    • Draft
    • Construction quality
    • Wood consumption
    Did you find this review helpful?
  • 4
    3 out of 3 members found this review helpful

    I have it for 2 years in a 115m² space and I am quite satisfied.

    Translated from Greek ·
    • Heating performance
    • Draft
    • Combustion space size
    • Construction quality
    • Value for money
    • Wood consumption
    Did you find this review helpful?
  • 5
    17 out of 18 members found this review helpful

    The best attraction is achieved with a drill bit size 15 with compression (size 13-15)... Perfect !!!!!!!!!!!!!!!!

    Translated from Greek ·
    • Heating performance
    • Draft
    • Combustion space size
    • Construction quality
    • Wood consumption
    • Value for money
    Did you find this review helpful?
    • Heating performance
    • Draft
    • Combustion space size
    • Construction quality
    • Wood consumption
    • Value for money
  • In a two-story house of 120 sqm and without perfect insulation, you can walk around with short sleeves. It heats up 6-7 bodies, it also heats up an extra water boiler that was installed and at the same time you can bake your pizzas, bread or any food in the oven it has.
    Consumption is about 10 tons/year.

    Tips

    The woods that should be used are mainly oak because the stove needs a flame + a little bit of ash to keep the charcoal overnight (duration).
    Definitely dry and seasoned woods, otherwise the chimney, the flue, and the stove will need cleaning quickly.
    Typically, it needs cleaning every month for sure.
    It doesn't smoke if you learn to operate it correctly over time.
    It needs a three-way valve before the circuit inlet to keep it in good condition for years without any damage. Every time we light the stove, this valve gradually introduces the (cold) water from the circuit into its tank (hot)... so it helps to prevent damage from sudden cold entry into a hot tank (contractions, expansions of metal sheets, etc.). Hydraulic installers are aware of these things.

    It is also good to have a UPS because if the power goes out, the stove raises high temperatures.
    CAUTION - THE HYDRAULIC STOVE IS MADE TO WORK IN A CIRCUIT WITH BODIES.

    Translated from Greek ·
    13
  • I have it for 3 years, it's an amazing stove, it's worth its money. It needs a conversion to a bigger size if possible, bigger. It dries wood and 120 square meters become heaven

    Translated from Greek ·
    5
  • I have it for 2 years in a 115m² space and I am quite satisfied.

    Translated from Greek ·
    3
  • The best attraction is achieved with a drill bit size 15 with compression (size 13-15)... Perfect !!!!!!!!!!!!!!!!

    Translated from Greek ·
    17
  • 0
  • See all
Questions (7)

Questions

13 users have this product and can help you

Ask for the product
Kostas_Kouf

γίνετε προσωρινά να την δουλευω δίχως νερο και του χρονου να την συνδεσω με καλοριφέρ ?

m_vkokkali

Ναί γίνεται αλλά δεν θα έχει την απόδοση που πρέπει γιατί είναι σχεδιασμένη να συνδεθεί με καλοριφέρ.

eva_vavli

Ποσα ξύλα καίει την ωρα?. Σφραγίζει καλα? Ποσα τετραγωνικά ζεσταίνει?

Athanasios_Katsoulis

Δεν παει με την ωρα, αλλα με τη μερα.
Βασικα αυτο που χρειαζεται ειναι ισα να διατηρειται η φωτια αναμενη, (χρειαζεται λιγο εξηκοιωση αυτο). Κατ'αυτον το τροπο καταναλωνει +-12 κιλα ξυλα την ημερα για 12 καλοριφερ σε μονωμενο διαμερισμα και μεχρι μηδεν βαθμους κελσιου εξω.

chrislepenos

Ήθελα να ρωτησω τι εννοειτε όταν λέτε ότι ή σόμπα έχει καλοριφέρ πάνω?είναι ενσωματωμένο?

antanastav

Η σόμπα έχει λέβητα απάνω όπου μέσα μπαίνει το νερό ζεσταίνεται και μετά με την κατάλληλη εγκατάσταση διοχετεύεται στα σώματα καλοριφέρ. Μόλις εγκατέστησα πριν μερικές εβδομάδες στο σπίτι μου.

rockass14
See all questions (7)

Description & Specifications

  • Built-in hot water jacket for connection to central heating system.
  • Combustion chamber with door with heat-resistant ceramic glass.
  • Combustion chamber with firebricks for heat reflection and cast iron grate.


Warning!

  • Do not start when it is not connected to radiators or fan coils. Burning wood in the stove/fireplace/boiler without water in the system will damage the jacket and cause leaks.
  • Achieving the desired heat output depends on:
    • the selected fuel with the required thermal power and moisture
    • regular refueling of combustible material
    • the adjustment of primary and secondary air
    • the adjustment of draft
    • the effective heat exchange of the fireplace with the environment, etc.
  • In any installation where copper is present, the hydraulic fireplace/stove/boiler should be protected from the phenomenon of electrolysis by installing a magnesium anode or a corresponding system
  • Wood stove with oven and boiler for connection to a home radiator circuit
  • Suitable for spaces: 130m² or 390m³
  • Thermal Power (boiler + stove): 18+5=23kW
  • Nominal boiler power: 15kW
  • Efficiency: 83%
  • Construction Material: Steel (5mm in the combustion chamber & 2.5mm around)
  • Insulating Material: Firebricks
  • Fuels: Wood, briquettes
  • Air supply regulator
  • Exhaust control regulator
  • Ash collection drawer
  • Fireproof glass with ventilation to keep it always clean
  • Water tank capacity: 15lt
  • Maximum water temperature: 90°C
  • Maximum operating pressure of the water circuit: 1bar
  • Factory test operating pressure: 1.8bar
  • Water connection diameter: ∅ 1"
  • Flue gas temperature: 190°C
  • Amount of emitted flue gases: 13gr/sec
  • Ash content: 38mg/m³
  • CO concentration in flue gases: 575mg/m³
  • CO emissions: 0.046%
  • Flue gas pressure (min): 12+/-2 Pa
  • Chimney diameter: ∅13cm
  • Door dimensions: 30 x 20cm
  • Combustion chamber dimensions (HxWxD): 43 x 46.5 x 27cm
  • Oven dimensions (HxWxD): 19 x 39.5 x 41.3cm
  • Dimensions (HxWxD): 105 x 57 x 53cm
  • Weight: 150kg
  • Additional equipment required for connection to the radiator, not included in the package
  • (circulator, supply collector, return collector, open expansion tank,
  • constant temperature valve, safety valve, check valve, air vent tank,
  • optionally you can use a three-way valve)

Manufacturer

Product Details

Air Ηeater
No
Radiator
Yes
Cook Stove (with Oven)
Yes
Chimney diameter
130 mm
Material
Metallic
Colour
Beige
Weight
150 kg
Wood Heating Stove
No

Performance

Energy Class
A
Total Power
21.4 kW
Power in Air
5.4 kW
Power in Water
16 kW
Energy Efficiency
76.4 %
Water Consumption
9.337 kg/h

Dimensions

Height
1050 mm
Width
570 mm
Length
530 mm

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (5)

  1. 3
  2. 2
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • Heating performance
  • Combustion space size
  • Value for money
  • Draft
  • Construction quality
  • Wood consumption
  • tsoler7196
    5
    13 out of 14 members found this review helpful

    In a two-story house of 120 sqm and without perfect insulation, you can walk around with short sleeves. It heats up 6-7 bodies, it also heats up an extra water boiler that was installed and at the same time you can bake your pizzas, bread or any food in the oven it has.
    Consumption is about 10 tons/year.

    Tips

    The woods that should be used are mainly oak because the stove needs a flame + a little bit of ash to keep the charcoal overnight (duration).
    Definitely dry and seasoned woods, otherwise the chimney, the flue, and the stove will need cleaning quickly.
    Typically, it needs cleaning every month for sure.
    It doesn't smoke if you learn to operate it correctly over time.
    It needs a three-way valve before the circuit inlet to keep it in good condition for years without any damage. Every time we light the stove, this valve gradually introduces the (cold) water from the circuit into its tank (hot)... so it helps to prevent damage from sudden cold entry into a hot tank (contractions, expansions of metal sheets, etc.). Hydraulic installers are aware of these things.

    It is also good to have a UPS because if the power goes out, the stove raises high temperatures.
    CAUTION - THE HYDRAULIC STOVE IS MADE TO WORK IN A CIRCUIT WITH BODIES.

    Translated from Greek ·
    • Heating performance
    • Draft
    • Combustion space size
    • Value for money
    Did you find this review helpful?
  • Dimitris_karres
    4
    5 out of 5 members found this review helpful

    I have it for 3 years, it's an amazing stove, it's worth its money. It needs a conversion to a bigger size if possible, bigger. It dries wood and 120 square meters become heaven

    Translated from Greek ·
    • Heating performance
    • Combustion space size
    • Value for money
    • Draft
    • Construction quality
    • Wood consumption
    Did you find this review helpful?
  • 4
    3 out of 3 members found this review helpful

    I have it for 2 years in a 115m² space and I am quite satisfied.

    Translated from Greek ·
    • Heating performance
    • Draft
    • Combustion space size
    • Construction quality
    • Value for money
    • Wood consumption
    Did you find this review helpful?
  • 5
    17 out of 18 members found this review helpful

    The best attraction is achieved with a drill bit size 15 with compression (size 13-15)... Perfect !!!!!!!!!!!!!!!!

    Translated from Greek ·
    • Heating performance
    • Draft
    • Combustion space size
    • Construction quality
    • Wood consumption
    • Value for money
    Did you find this review helpful?
    • Heating performance
    • Draft
    • Combustion space size
    • Construction quality
    • Wood consumption
    • Value for money
  • In a two-story house of 120 sqm and without perfect insulation, you can walk around with short sleeves. It heats up 6-7 bodies, it also heats up an extra water boiler that was installed and at the same time you can bake your pizzas, bread or any food in the oven it has.
    Consumption is about 10 tons/year.

    Tips

    The woods that should be used are mainly oak because the stove needs a flame + a little bit of ash to keep the charcoal overnight (duration).
    Definitely dry and seasoned woods, otherwise the chimney, the flue, and the stove will need cleaning quickly.
    Typically, it needs cleaning every month for sure.
    It doesn't smoke if you learn to operate it correctly over time.
    It needs a three-way valve before the circuit inlet to keep it in good condition for years without any damage. Every time we light the stove, this valve gradually introduces the (cold) water from the circuit into its tank (hot)... so it helps to prevent damage from sudden cold entry into a hot tank (contractions, expansions of metal sheets, etc.). Hydraulic installers are aware of these things.

    It is also good to have a UPS because if the power goes out, the stove raises high temperatures.
    CAUTION - THE HYDRAULIC STOVE IS MADE TO WORK IN A CIRCUIT WITH BODIES.

    Translated from Greek ·
    13
  • I have it for 3 years, it's an amazing stove, it's worth its money. It needs a conversion to a bigger size if possible, bigger. It dries wood and 120 square meters become heaven

    Translated from Greek ·
    5
  • I have it for 2 years in a 115m² space and I am quite satisfied.

    Translated from Greek ·
    3
  • The best attraction is achieved with a drill bit size 15 with compression (size 13-15)... Perfect !!!!!!!!!!!!!!!!

    Translated from Greek ·
    17
  • 0
  • See all
765,00 €
22,00 €  
Delivery to your floor available