Syntilor Lasure impregnation varnish ensures excellent protection for all outdoor and indoor wooden structures.
It is a long-lasting, highly durable product, waterproof, unaffected by ultraviolet rays, thanks to polyurethane resins in aqueous phase.
Its microporous composition, as well as its long-lasting satin appearance, make it an ideal product for exterior wooden surfaces. It protects against insects, fungi, and intense solar radiation (ultraviolet rays).
- CHARACTERISTICS
- High-strength resins in aqueous phase.
- Transparent gel composition. The wood grain is visible.
- Odorless.
- Exceptional longevity.
- Microporous, waterproof.
- Very quick drying and hardening.
- High protection against ultraviolet rays.
- Highlights the natural hue and beauty of the wood.
- Complies with environmental protection.
- Yield: 10-12 m² per coat per liter.
- Available in 16 wonderful shades.
PREPARATION
- Apply to old or new wood that is healthy, clean, non-greasy, and dry, properly prepared.
- Eliminate if necessary the old finishes (cracked paints and varnishes, oils, etc.).
- Dulling very smooth wood facilitates product penetration.
- Thoroughly sand with sandpaper for better preparation by "opening" the wood's pores.
APPLICATION
- Use under normal conditions. Do not apply to wood with moisture content above 10% or whose moisture varies significantly.
- No dilution needed.
- Apply Lasure Microporeuse AQUARÉTHANE with a brush, in two or three uniform and well "filled" coats, following the wood grain, without exceeding 48 hours between coats.
- Lightly sand the first coat with fine sandpaper to remove uneven wood surfaces.
- On vertical wood surfaces and in the case of Southern or Western exposure, apply 3 coats.
- Tip: in all cases lightly sand between coats (fine sandpaper) to eliminate small wood imperfections and achieve a beautiful finish.
CLEANING OF TOOLS:
- Thoroughly wring out brushes after application and wipe well.
- Rinse with very little water after application; let this water evaporate.
- The dry residue can be normally disposed of in the garbage bin.
- Close the packaging tightly after use.
- Do not dispose of remnants in sewers.
- Product Number
- 99553
- Type
- Impregnation Varnish
- Surface Material
- of Wood
- Glossiness
- Satin
- Insecticide / Antifungal
- No
- Diluting Agent
- Water
- Polyurethane
- No
- 2-Component
- No
- Quantity
- 0.75 lt
- Colour
- Oak
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.