Elastomeric protective coating designed to insulate and seal leaks and cracks. It creates a thick elastic film that prevents moisture penetration, rust, and corrosion, and it paints when dry. It has high resistance to weather conditions and UV rays. It offers coverage and protection to surfaces without damaging them.

• A fast-application primer for perfect pre-treatment of metal surfaces
• Improves adhesion on all surfaces except plastic
• High coverage
• Enhances the gloss level of the paint
• Protects against oxidation
• Resistant to high temperatures
• Truly elastic and durable in the long term
• Easy to use and easy to sand
• Smooth, even finish
• Easy to apply
• Viscosity: 25-35 sec
• Specific weight: 1.0 ± 0.03 g/L
• Flash point: -104 oC
• Drying Time: Touch (20°C, Humidity<65%): 10-15 min, Full Drying (20°C, Humidity <65%): 1h
• Curing: 24 hours
• Coverage: 3m2/L
• 500ml

Shake the can for at least 3 minutes after hearing the mixing ball. Before the first use, spray into the air for 3-4 seconds, using the black valve, to remove any condensed paint from the internal tube. Test the spray initially on a test surface. For best results, paint at temperatures between 10-25°C and when humidity is below 65% to ensure proper application. After use, turn the can upside down and spray for 3 seconds.

TIPS:

• Ensure the surface is clean, smooth, and dry
• Always use personal protective equipment gloves/mask
• Use outdoors or in any well-ventilated area, such as an open garage
• The area should be as dust-free as possible
• Remove wheels, cover rotors, and apply the paint.
• Protect the surrounding area to avoid accidents
• Test first on a spray test surface
• Always spray with the can in an upright position; otherwise, the paint may spray unevenly
• Spray the surface from a distance of 25-30 centimeters
• Apply several thin layers, spraying in quick movements
• After use, clean the spray valve (turn the aerosol upside down and press the nozzle for about 5 seconds).