It is a typically modern and elegant water-based decorative paint for interior use. KLONDIKE LIGHT can be applied to a wide range of surfaces. Thanks to its unique colors and shades, it can be used to create highly current and modern living spaces.

• The decorated surfaces highlight the precious metallic shards incorporated into the paint, enhancing the gold, silver, and oxidized effects.
• KLONDIKE LIGHT is a high-quality product, breathable, washable, and can be repainted with any other water-based color.

SURFACE PREPARATION

• Old wall:
  • Remove all old, flaking, and peeling paints and clean.
  • Then apply a stabilizing primer according to the type of surface.
  • When the primer is completely dry, apply a coat of PRIMER 600 (slightly tinted in a light gray shade) and, after 6 hours at 20°C, proceed with the application of KLONDIKE LIGHT.
• New wall:
  • Clean (and if necessary, fill/putty) the surface you want to paint.
  • Once dry, sand the surface and apply a coat of suitable primer.
  • When the primer is completely dry, apply a coat of PRIMER 600 (slightly tinted in a light gray shade) and, after 6 hours at 20°C, proceed with the application of KLONDIKE LIGHT.
• Wood, glass, light alloys, and painted iron:
  • Remove all grease from the surface and sand well, so that it is smooth and clean.
  • Apply a coat of primer suitable for the specific type of surface and then apply a coat of PRIMER 600 (slightly tinted in a light gray shade).
  • After 6 hours at 20 °C, proceed with the application of KLONDIKE LIGHT.
• New iron (without preparation):
  • Remove all grease and any layers of rust from the surface and apply a coat (or more) of suitable rust treatment product.
  • When this is completely dry, apply a coat of PRIMER 600 and after 6 hours at 20°C, proceed with the application of KLONDIKE LIGHT.
  • Thinning: ready for use.
  • Application system with brush and spatula.
  • Coats: two (2).