Skroutz.gr

Anavalos Single-phase Pump Drilling VN 5/7
Submersible Water Pumps

Anavalos Single-phase Pump Drilling VN 5/7

Pump Description: Completely stainless steel pump. Water-cooled motor with double mechanical seal. Stainless steel impellers. It features a cable connection and float with a plug-in connector (for...

Pump Description: Completely stainless steel pump. Water-cooled motor with double mechanical seal. Stainless steel impellers. It features a cable connection and float with a plug-in connector (for easy connection). Of European origin.

Features

  • Stainless steel submersible pumps with integrated motor for boreholes of 6" and above.
  • Construction of impellers...
See full description See full description

Top specs

  • Voltage

    Single-Phase

    Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 

  • Manometric Height

    77

    The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

    • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
    • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
  • See all
648 77 €
649 Coins 649 Coins
Delivery up to 15 days
16,00 €  

Reduced Shipping

For purchases from Skroutz a discount is applied for this particular product.

Learn more
Delivery to your floor available
Do you want it with 6,00 € shipping?
From Utools 4.9 (48)
4.9 (48 reviews)
Άγιος Ιωάννης Ρέντης, Αττικής
1 piece
See Water Pumps on the page of Utools
What if it breaks?

You're covered by the statutory 2-year warranty. Contact us and we'll handle the entire process with the store, ensuring your issue is resolved with prompt support through a repair, replacement, or refund.

What if I change my mind?

No problem, as long as it's within 14 days. We'll come and pick it up (completely free of charge if you have Skroutz Plus) and refund your money.

Review the product
Product report

Description

Description

Pump Description: Completely stainless steel pump. Water-cooled motor with double mechanical seal. Stainless steel impellers. It features a cable connection and float with a plug-in connector (for easy connection). Of European origin.

Features

  • Stainless steel submersible pumps with integrated motor for boreholes of 6" and above.
  • Construction of impellers and chambers from stainless steel for long life and high performance.
  • Double mechanical seal separated from the oil chamber for maximum motor protection.
  • Power cable and float connect directly to the pump via a plug-in connector for easy replacement.
  • Discharge outlet 1''1/4 Rp.

Performance

  • Flow rate up to 14 m3/h.
  • Head up to 77 m.
  • Electric motor power from 2 kW.
  • Insulation class F, protection IP 68.
  • Rotational speed 2900 r.p.m. (50 Hz).

Applications

  • For drinking water in habitable areas drawn from boreholes or wells.
  • For water supply.
  • For irrigation.
  • For urban and industrial applications.
  • For drainage.
  • For pressurized tanks in tall buildings.

Operating Conditions

  • Water temperature up to 40 °C.
  • Maximum sand content in water: 50 gr/m3.
  • Maximum diameter of incoming solids up to 2 mm.
  • Maximum immersion depth 20 m.
  • Continuous operation in horizontal and vertical position.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
Drilling

Type

Drilling
Drilling pumps are used for pumping water or other liquids from underground boreholes (water sources) to surfaces for various purposes, such as water supply, irrigation, industrial applications
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
Yes

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Outlet Nozzle
1 1/4", 6"

Outlet Nozzle

The outlet nozzle refers to the point or the external diameter of the pump from which the pumped water or liquid exits. It is an important feature for determining the connection of the pump with the piping system and affects the flow capacity of the liquid.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
77 m

Maximum Head Height: 77


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Maximum Output
14 m³/h

Maximum Output

The maximum output or flow of a submersible water pump, as defined by the manufacturers, is the maximum amount of water the pump can move under ideal conditions, usually with zero head (i.e., no lift resistance).
Pump Submersion Depth
20 m
Maximum Particle Size
2 mm

Maximum Particle Size

Specifies the largest size of solid particles (such as sand, stones, or other impurities) that the device can pump without clogging or being damaged.
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
No
Protection Certification
IP68

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications
Questions

Questions

Do you have a question about the product?

Those users who have this product can help you

Ask for the product

Description & Specifications

Pump Description: Completely stainless steel pump. Water-cooled motor with double mechanical seal. Stainless steel impellers. It features a cable connection and float with a plug-in connector (for easy connection). Of European origin.

Features

  • Stainless steel submersible pumps with integrated motor for boreholes of 6" and above.
  • Construction of impellers and chambers from stainless steel for long life and high performance.
  • Double mechanical seal separated from the oil chamber for maximum motor protection.
  • Power cable and float connect directly to the pump via a plug-in connector for easy replacement.
  • Discharge outlet 1''1/4 Rp.

Performance

  • Flow rate up to 14 m3/h.
  • Head up to 77 m.
  • Electric motor power from 2 kW.
  • Insulation class F, protection IP 68.
  • Rotational speed 2900 r.p.m. (50 Hz).

Applications

  • For drinking water in habitable areas drawn from boreholes or wells.
  • For water supply.
  • For irrigation.
  • For urban and industrial applications.
  • For drainage.
  • For pressurized tanks in tall buildings.

Operating Conditions

  • Water temperature up to 40 °C.
  • Maximum sand content in water: 50 gr/m3.
  • Maximum diameter of incoming solids up to 2 mm.
  • Maximum immersion depth 20 m.
  • Continuous operation in horizontal and vertical position.

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
Drilling

Type

Drilling
Drilling pumps are used for pumping water or other liquids from underground boreholes (water sources) to surfaces for various purposes, such as water supply, irrigation, industrial applications
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
Yes

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Outlet Nozzle
1 1/4", 6"

Outlet Nozzle

The outlet nozzle refers to the point or the external diameter of the pump from which the pumped water or liquid exits. It is an important feature for determining the connection of the pump with the piping system and affects the flow capacity of the liquid.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
77 m

Maximum Head Height: 77


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Maximum Output
14 m³/h

Maximum Output

The maximum output or flow of a submersible water pump, as defined by the manufacturers, is the maximum amount of water the pump can move under ideal conditions, usually with zero head (i.e., no lift resistance).
Pump Submersion Depth
20 m
Maximum Particle Size
2 mm

Maximum Particle Size

Specifies the largest size of solid particles (such as sand, stones, or other impurities) that the device can pump without clogging or being damaged.
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
No
Protection Certification
IP68

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

648,77 €
16,00 €  

Reduced Shipping

For purchases from Skroutz a discount is applied for this particular product.

Learn more
Delivery to your floor available