- 420cc petrol engine: High-power, four-stroke, air-cooled OHV engine with electric and recoil starters.
- Maximum branch cutting capacity of 120mm: Shreds thick branches directly using a rotating drum with 2 HSS blades.
- Output of 4 to 6 m³/h: High shredding productivity for quickly processing large volumes of branches.
- Electric start with battery: Easy starting with an 18Ah AGM battery and centrifugal drive clutch.
At a glance
- 420cc petrol engine: High-power, four-stroke, air-cooled OHV engine with electric and recoil starters.
- Maximum branch cutting capacity of 120mm: Shreds thick branches directly using a rotating drum with 2 HSS blades.
- Output of 4 to 6 m³/h: High shredding productivity for quickly processing large volumes of branches.
- Electric start with battery: Easy starting with an 18Ah AGM battery and centrifugal drive clutch.
Powerful 420cc engine with electric start
Start the 420cc four-stroke OHV engine instantly with the turn of the key, thanks to the 18Ah AGM battery, or use the recoil starter. The built-in oil level sensor protects the engine from damage, while the 6.5-litre fuel tank with a shut-off valve provides uninterrupted runtime so you can complete every cleanup job without frequent stops.
Branch Cutting with a Rotating HSS Drum
Feed branches up to 120 mm in diameter into the spacious 490 x 450 mm hopper and watch them shred in seconds. The rotating drum, running at 2,200 rpm and equipped with two reversible HSS blades and a centrifugal clutch, delivers output of up to 6 m³/h. Direct the material wherever you need with the 360° rotating discharge chute, which adjusts up and down for maximum convenience.
Ultimate safety and easy transport
Work safely with the special safety bar and emergency shut-off switches on the hopper and blades. The hopper’s hinges allow quick opening for cleaning, while the greasable bearings make maintenance easier. Move the machine anywhere on your property using the tow hitch and 16×8.00-7 lug tires.
Technical Specifications
- Model: Kraft 691134
- Product code: 691134
- Engine type: 420 cc, single-cylinder, air-cooled, 4-stroke OHV
- Starting system: Electric starter and recoil starter
- Battery type: 18x8x16 AGM 18Ah (6DM18)
- Maximum chipping capacity: 120 mm
- Minimum chipping capacity: 5 mm
- Minimum moisture content of material to be chipped: 80%
- Production capacity: 4–6 m³/h
- Hopper inlet opening (W x H): 490 x 450 mm
- Blade inlet opening (W x H): 300 x 150 mm
- Chipping method: Rotating drum on bearings (greased with NLGI 2 grease)
- Number of blades: 2 reversible, double-edged HSS (High Speed Steel) blades
- Blade rotation speed: 2200 rpm
- Blade clearance adjustment: Yes
- Discharge chute adjustment: 360° rotation and up/down tilt
- Feed hopper: Easy to open with hinges
- Drive system: 2x17x1025Li belt with centrifugal clutch
- Fuel tank capacity: 6.5 L (with fuel shut-off valve)
- Fuel consumption at rated power: 2.9 L/h
- Oil sump capacity: 1.1 L
- Engine oil type: SAE 15W50
- Low oil sensor: Yes
- Safety system: Operator safety bar and 2 shut-off switches (on the hopper and blades)
- Tyres: 16×8.00-7
- Towing hitch: Yes
- Length without towing hitch: 1.8 m
- Machine dimensions (L x W x H): 280 x 80 x 149 cm
- Package dimensions (L x W x H): 895 x 765 x 1210 mm
- Machine weight: 185 kg
- Package weight: 205 kg
- Warranty: 12 months
Package Contents
- Kraft 691134 petrol-powered wood chipper
- 18 Ah AGM starter battery
- Towing hitch
- Wheels with 16×8.00-7 tyres
- Hinged feed hopper
- 360° adjustable discharge chute
Dimensions
- Power Source
- Gasoline
- Self-Driving
- No
Technical Specifications
- Collection Method
- Ground
- Cutting System
- Knives
- Cutting efficiency
- -
- Shredding Capacity
- 120 mm
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.