Isomat DUROCRET polymer-modified cement mortar is intended for repairing concrete, masonry and plaster surfaces, as well as for forming coves. The terracotta shade is used to secure ridge tiles on roofs. It is classified as a PCC R2 concrete repair mortar in accordance with EN 1504-3.
- Type: Polymer-modified cement repair mortar
- Use: Interior and exterior
- Colours: Grey, white and terracotta
- Aggregate size: Up to 1.3 mm
- Properties: Abrasion-resistant, very good adhesion to the substrate and water-repellent
- Consumption: Approximately 15 kg/m² per cm of layer thickness; 1.9–2.7 kg/m for forming a cove
- Layer thickness: Up to 2 cm over large surfaces and up to 5 cm for local repairs
- Water requirement: 4.60 l per 25 kg bag
- Pot life: 4 h at +20 °C
- Application temperature: Minimum +5 °C
- Compressive strength: Grey ≥ 17.0 N/mm², white ≥ 16.00 N/mm², terracotta ≥ 15.0 N/mm²
- Flexural strength: Grey ≥ 6.0 N/mm², white ≥ 6.00 N/mm², terracotta ≥ 5.0 N/mm²
- Adhesion: Grey ≥ 1.7 MPa, white ≥ 1.70 MPa, terracotta ≥ 1.10 MPa
- Chloride content: 0.00%
- Reaction to fire: Euroclass A1
- Environmental declaration: EPD-IES-0009183
- Weight: 25 kg
- Type
- Cement mortar
- Weight
- 25 kg
- Pressed Cement Mortar
- Yes
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.