LA VIA LATTEA offers washability and has countless application possibilities. It is suitable for decorating interior surfaces.

• Specific weight: 1.15 ± 30 gr / lt at 25 °C
• Coverage: 6-7 m² / lt per layer (may vary depending on roughness, absorbency of the surface, and application method)
• Weathered matte appearance
• pH 8-8.5
• Vapor permeability - Preservation: Preserved for at least 2 years
• Colors: White base (can be tinted with GgF pigments, resistant to UV radiation)
• Packaging: LT. 1 – 2.5 and 5L
• Surface drying: 60’ at 20°C
• Repainting: 3-4 hours at 20°C
• Through drying: 6 hours at 20°C

• Remove all flaking old paints and clean.
• Next, apply a stabilizing primer according to the type of surface.
• When the primer is completely dry, apply a layer of PRIMUS SABBIA.
• After 4-6 hours at 20°C, proceed to apply LA VIA LATTEA.

• Clean (and if necessary, fill) the surface you want to paint.
• Once dry, sand the surface and apply a suitable primer layer.
• When the primer is completely dry, apply a layer of PRIMUS SABBIA.
• After 4-6 hours at 20°C, proceed to apply LA VIA LATTEA.
• Dilution: dilute with 30% water.
• Application tools: with the NEVE brush.
• Layers: two (2) layers.

LA VIA LATTEA is ready to use. Add the amount of pigments as specified in the catalog, then add water (300 ml of water for every liter of LA VIA LATTEA). Mix well until the resulting effect has the shade you desire. Then, the product can be applied in 2 layers with the NEVE brush, with a motion from top to bottom and from left to right, successively for each layer.