Gloria Stark 1200 firebrick adhesive is intended for laying and grouting firebricks in grills, BBQs, fireplaces, chimneys and ovens, as well as for coating old ovens and repairing loose firebricks. It withstands temperatures of up to 1200 °C, adheres to vertical surfaces, and is resistant to weathering and outdoor conditions. It can also be used as a sealant for joints in asbestos-cement pipes.
Before application, remove dust, mud and sand from the firebricks. Mix the adhesive with water in a clean container until it forms a homogeneous, cohesive paste, then leave it to stand for 3–4 minutes before laying the bricks. In high temperatures, dampen the firebricks with a little water. Use the same product for grouting. Remove any excess before the paste dries, and clean the surface with a damp sponge. The firebox can be used 3 days after the bricks are laid.
- Type: Firebrick adhesive
- Quantity: 25 kg
- Temperature resistance: Up to 1200 °C
- Applications: Laying and grouting firebricks, coating old ovens, repairing loose firebricks, and sealing joints in asbestos-cement pipes
- Application: With a trowel or spatula
- Mixing water: 5.7 L per 25 kg
- Waiting time after mixing: 3–4 minutes
- Time before using the firebox: 3 days
- Consumption: 4–6 kg/m², depending on the size of the fire-resistant elements and the width of the joints
- Product Number
- 02-0072
- Type
- Fire Brick
- Quantity
- 25 kg
- Colour
- -
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.