To ensure proper adhesion of the product, the surface must be cleaned of dust, grease, oils, flaking old paints, rust, mold or moisture residues.

Apply the product directly onto the surface. Clean with a mild cleaner 5 days after the completion of painting. The product gains all its mechanical strengths after 20 - 30 days.

APPLICATION CONDITIONS: Avoid applying the product at temperatures below 6°C and above 40°C and when the relative humidity is above 80%. Adverse conditions during application can alter the final properties of the product.

APPLICATION TOOLS:

• Brush
• Roller

During work, keep the tools “wet” inside the container. Wring out the product from the tools and clean them immediately with White spirit. If the product dries, it can only be removed with strong detergents. Do not dispose of washing liquids in the water table.

CAUTION: Wear protective gloves / protective clothing / eye / face personal protective equipment. In case of contact with eyes, rinse carefully with plenty of water for several minutes. If contact lenses are present, remove them if easy to do so. Continue rinsing.

TECHNICAL CHARACTERISTICS:

• YIELD: 12-14m2 / Lt on properly prepared surfaces
• DILUTION: 1 - 5% Nitro solvent
• DRYING TIME: 4 - 5 hours depending on application conditions