It is applied to wall tiles in kitchens and bathrooms as well as to surfaces made of wood, plaster, cement, concrete, brick, drywall, steel, galvanized iron, aluminum, copper, brass, glass, and PVC. It can be repainted after a significant period without altering its properties. It has antioxidant properties and is suitable for both indoor and outdoor use.

• Finish: Satin
• Shade: White
• Coverage: 10-15 m²/L (depending on the absorbency of the surface)
• Recommended thickness: 100-150 microns
• Drying time: 30 -60 minutes to the touch at 20°C
• Repainting: 6 hours (plastic), 12 hours (varnish), 24 hours (2-component)
• Dilution / Tool cleaning: Water
• Packages: 750 ml, 2.5 ltr
• Application tools: Brush, roller, spray gun

• Mix very well until the product is homogeneous.
• Do not apply at temperatures below 5 °C or above 35°C, or on hot surfaces.
• Apply it in well-ventilated spaces with humidity below 80%.

• The surface must be clean, free from dust and grease. You may lightly sand with sandpaper for improved adhesion.
• Tiles: Clean and remove dust. Do a test before application.
• Wood: Remove dirt and resins and lightly sand along the grain of the wood.
• Metal: Lightly sand with sandpaper and clean from grease.
• PVC and methacrylate: Clean, lightly sand, and do a test before application.

For maximum performance, apply two coats of the product to tiles and surfaces made of wood, iron, galvanized metal, aluminum, and PVC.

• Airless spray gun: 0-10%
• Air mixing spray gun: 0-10%
• Airbrush: 0-10%
• Turbo low pressure: 0-10%