Self-adhesive frosted glass film is used to ensure privacy. Through it, you will only see silhouettes from whatever side you look at it. The film is applied to the glass, allows natural light to pass through, and blocks sunlight.

Technical specifications:

• Self-adhesive
• Transparent
• Material - PVC
• Roll width - 105 cm

Application instructions:

• The film can be applied to mirrors or plexiglass: windows, glass doors, shower cabins. Installation can be carried out in spaces with a minimum temperature of 15 degrees Celsius.
• Steps for applying the film with water:
• Clean and degrease the glass.
• Prepare the application solution by mixing 1 liter of water with 1 teaspoon of liquid dish detergent or shampoo.
• Cut the piece of film you need for the window, leaving a margin of 2-3 cm.
• Remove the protective sheet from the back of the film, spray the solution on the back side of the film as you remove the sheet. This way, the film will not attract dust.
• Spray the solution on the window as well, then gently apply the film and make the necessary adjustments. Start pushing from the center towards the edges to remove the water and air bubbles. Using a well-sharpened cutter, cut away the excess material next to the cheder.

After application, white marks/spots may appear under the film. These represent a reaction of the adhesive with water and will disappear after drying. The adhesive will dry completely in about 1 week.