The window stickers made of shattered glass offer privacy. Through them, you'll only see shadows from any side you look at. The film is applied to the glass, allows natural light to pass through, and reduces glare.

Technical specifications of shattered glass sticker film:

• Self-adhesive, transparent material - PVC
• Silicone film
• Roll width - 137 cm

Application instructions:

• The film can be applied to glass, mirrors, or crystal surfaces: windows, glass doors, shower enclosures.
• Installation can be performed in spaces with a minimum temperature of 15 degrees Celsius.

Steps for application with water (required materials: window cleaning solution, water, dish detergent/shampoo, spray bottle, scraper, cutter, cloth):

1. Clean and degrease the window.
2. Prepare the application solution with 1 liter of water and 1 teaspoon of liquid detergent or shampoo.
3. Cut the piece of film needed for the window, leaving a margin of 2-3 cm.
4. Remove the protective sheet from the back of the film, spray the solution on the back of the film as you remove it.
5. Spray the solution on the window as well, then lightly apply the film and make the necessary adjustments.
6. Start scraping from the center to the edges to remove water and air bubbles.
7. Using a well-sharpened cutter, cut the excess material close to the frame.
8. After the application, white spots may appear under the film. These are a reaction of the adhesive with the water and will disappear once it dries. The adhesive will fully dry in about 1 week.