Self-adhesive satin glass film is used to achieve privacy. Through it, you will only see shadows, regardless of the side from which you look. The film is applied to the glass, allowing natural light to pass through while blocking sunlight.

Technical specifications of self-adhesive satin glass film:

• Self-adhesive
• Transparent
• Material - PVC
• Roll width - 105 cm

Application instructions for satin films:

Films can be applied to mirrors or Plexiglas: windows, glass doors, shower cabins. Installation can take place in areas with a minimum temperature of 15 degrees Celsius.

Steps for applying the film using water (required materials: window cleaning solution, water, dish soap/shampoo, spray bottle, squeegee, cutter, cloth):

• Clean and degrease the glass.
• Prepare the application solution by mixing 1 liter of water with 1 teaspoon of liquid dish soap or shampoo.
• Cut the piece of film you need for the window, leaving a margin of 2-3 cm.
• Remove the protective liner from the back of the film, then spray the solution on the back of the film as you remove the liner. This way, the film will not attract dust.
• Spray the solution on the window as well, then carefully apply the film and make the necessary adjustments. Start sweeping from the center to the edges to remove water and air bubbles. Using a well-sharpened cutter, cut the excess material next to the cheder.

After application, white spots/marks may appear under the film. These represent a reaction of the adhesive with the water and will disappear after drying. The adhesive will dry completely in about 1 week.