The frosted glass sticker is ideal for ensuring privacy. Through it, you will only see shadows from any side you look at. The film is applied to the glass, allowing natural light to enter and protecting against the sun.

Technical specifications:

• Sticker
• Transparent
• Material - PVC
• Roll width - 105 cm

Installation instructions:

The film can be applied to mirrors or plexiglass: windows, glass doors, shower stalls. Installation can be done in spaces with a minimum temperature of 15 degrees Celsius.

Steps for applying the film with water:

1. Clean and degrease the glass.
2. Prepare the application solution by mixing 1 liter of water with 1 tablespoon of liquid dish soap or shampoo.
3. Cut the piece of film you need for the window, leaving a margin of 2-3 cm.
4. Remove the protective sheet from the back side of the film, spray the solution on the back side of the film as you remove the protective layer. This way, the film will not attract dust.
5. Spray the solution on the window as well, start applying the film and make necessary adjustments. Begin scraping from the center towards the edges to remove water and air bubbles. With a sharp cutter, trim the excess material close to the edge.

After application, white spots/marks may appear under the film. They represent a reaction of the glue with the water and will disappear after drying. The glue will dry completely in about 1 week.