The substrates should be dry, degreased, and free of dust. Remove the cap and desiccant from the bottom of the aluminum cartridge, open a hole at the end of the cartridge, screw on the application nozzle, place it in the dispensing gun, and apply to the desired area. Smooth the applied sealant with a spatula within 30 minutes. Remove uncured sealant with solvent, mechanically harden. The sealant cures 4 mm/24 hours.

Use between +5°C and +40°C. The cured sealant material withstands temperatures from -40°C to +80°C.

• GHS07 - Irritant substances
• H302 - Harmful if swallowed.
• H312 - Harmful in contact with skin.
• H315 - Causes skin irritation.
• H319 - Causes serious eye irritation.
• H332 - Harmful if inhaled.
• P101 - If medical advice is needed, have product container or label at hand.
• P102 - Keep out of reach of children.
• P261 - Avoid breathing vapors.
• P264 - Wash hands and affected areas of the body thoroughly after handling.
• P280 - Wear protective gloves/eye protection/face protection.
• P501 - Dispose of contents/container in accordance with local regulations.

Contains hazardous substances: xylene- ethylbenzene- calcium oxide- 3-glycidoxypropyltrimethoxysilane