Soak the model in clean water, rinse or wash with ultrasound, then dry and solidify. The Anycubic Wash & Cure machine is recommended for perfect results. (It is not recommended to pour the remaining liquid directly into the drain, but to process it with full curing or heating to evaporate the water).

The test shows that the cured models printed with Anycubic Water-Wash Resin+ can be stored for 3 years in the natural environment without cracking. (According to the ISO21207 standard, 72 hours without any coating protection under experimental conditions is equivalent to 3 years in the natural environment). Test conditions: neutral salt (concentration 5%) - temperature (35°C) - humidity (95%).

Printing accuracy is improved due to the low shrinkage rate that allows each model to be printed with precise details. To ensure the stable performance of the resin, please remove the model in a timely manner after cleaning to avoid deformation caused by immersing the model in water for an extended period.

Anycubic Water-Wash Resin+ has a low odor and can ensure a much better printing experience for customers. Although the resin does not have a strong smell, we recommend maintaining indoor ventilation during printing.

Compatible with the wide range of 365-405nm, the Anycubic Water-Wash Resin+ is suitable for most 3D resin printers on the market. You can achieve better results with Anycubic LCD-based SLA 3D printers.