IPUPS-9-11-F Buffer set for 9 cameras IP PoE Switch 9P+1UP.

The IPUPS-9-11-F is a ready-made kit dedicated to the buffer power supply of a CCTV IP system consisting of 9 IP cameras. The electronic protection of the PoE outputs ensures continuous operation of the entire system in the event of a short circuit or overload of individual power branches and automatic voltage recovery after the fault disappears.

Key features and functions:

• Ability to buffer power for 9 PoE 802.3at/af or PASSIVE receivers.
• Ability to transmit data over 280 meters (in long-range mode).
• Electronic protection independently for each PoE channel (automatic return).
• Ability to disable power on selected PoE ports.
• Clear visual indication of power and data transmission status.
• Power capability up to 65 W on the LAN_5 PoE IN/OUT port.
• Power capability up to 40 W on other PoE ports.
• Easy and quick commissioning without the need for parameter configuration.
• High efficiency of the power supply unit (90%).
• Two available power supply voltage values: 12VDC and 48VDC.
• Easy and quick installation service thanks to its modular structure.
• Easy expansion and scaling of the system.
• Ability to maintain spare cables inside the enclosure.

The "Long Range" function allows you to increase the transmission range to 280 meters using a standard UTP twisted pair cable. The switch allows operation in two modes: standard and extended range. When the Long Range switch is in the OFF position, all ports operate at 100 Mbps and offer Ethernet range up to 100 meters. After switching the DIP switch to the ON position, the range increases to 280 meters and the speed on ports 1 to 4 decreases to 10 Mbps.

The switch supports PoE short circuit and surge protection to protect network devices.

The internal enclosures of the ABOX series provide a convenient solution to the problem of aesthetics.