Inhalation spacer Aeolos for children aged 0-6 (Mask + Mouthpiece). The aeolos is an anti-static inhalation spacer with a one-way valve used for the effective administration of inhalable medications. Using aeolos significantly reduces the amount of medication deposited in the oral cavity and pharynx, achieving greater absorption of the medication by the lungs. Thanks to its small size and inhalation control technology, it is ideal for managing asthma.

• Combines two products in one: Mask and Mouthpiece together.
• BPA FREE (non-toxic plastic). Safe non-toxic plastic without bisphenol A.
• Small size that makes it particularly handy.
• Large chamber capacity of 175ml.
• Special reduced resistance valve (butterfly type) that facilitates medication intake.
• Exhalation valve on the mask.
• Whistle at the back of the chamber that provides an alert when the intake is performed at a fast/inefficient rate.
• Metered Dose Inhaler (MDI) slot compatible with widely known aerosol medications.
• Transparent construction material that allows monitoring of the aerosol inside the chamber.
• Available in three mask sizes: Infant (0-18 months), Child (1-6 years), Adult (6+ years).

• A visual inspection of the inside of the spacer should be made before each use. If any defect is found, the device should be replaced.
• Remove the cap from the inhalation metered device, shake well and insert it into the spacer.
• Apply the mask to the face and ensure there are no losses during inhalation.
• Press the inhalation metered device ensuring the patient inhales slowly. If the sound of the whistle is heard, inhalation should be done at a slower rate.
• The mask should remain applied to the patient's face for 5-6 breaths with the administration of one spray.

• Remove the rear part of the spacer.
• Immerse all parts of the spacer in lukewarm water and a mild cleaning solution. CAUTION! Avoid scrubbing the parts of the spacer with a cloth or sponge.
• Rinse the parts of the spacer with clean water or place them on the top rack of the dishwasher (up to 70° C) in an upright position.
• Place the parts of the spacer vertically on a dry surface to dry. CAUTION! Avoid drying the parts of the spacer with a cloth or cleaning paper.
• Before reassembling the spacer, ensure all parts are dry.

The spacer should be replaced after one year of use.